Axis Communications AXIS P1343 Network, Basic TCP/IP Settings, IPv4 Address Configuration

Page 40

AXIS P1343 Network Camera

System Options

To change the date and time settings, select the preferred Time mode under New Server Time:

•Synchronize with computer time sets date and time according to the computer’s clock. With this option, date and time are set once and will not be updated automatically.

•Synchronize with NTP Server obtains date and time from an NTP server. With this option, date and time settings are updated continuously. For information on NTP settings, see NTP Configuration, on page 41.

If using a host name for the NTP server, a DNS server must be configured. See DNS Configuration, on page 41.

•Set manually allows you to manually set date and time.

If using an NTP server, select your Time zone from the drop-down list. If required, check Automatically adjust for daylight saving time changes.

The Date & Time Format Used in Images is the date and time format displayed as a text overlay in the video stream. Use the

predefined formats or see File Naming & Date/Time Formats in the online help for information on how to create custom date and time formats. To include date and time in the overlay text, go to Video & Audio and select Include date and Include time.

Network

Basic TCP/IP Settings

The Axis product supports IP version 4 and IP version 6. Both versions can be enabled simultaneously, and at least one version must always be enabled.

IPv4 Address Configuration

By default, the Axis product is set to use IPv4 (IP version 4) and to obtain the IP address automatically via DHCP. The IPv4 settings are configured under System Options > Network > TCP/IP > Basic.

DHCP (Dynamic Host Configuration Protocol) allows network administrators to centrally manage and automate the assignment of IP addresses. DHCP should only be enabled if using dynamic IP address notification, or if the DHCP can update a DNS server, which when allows you to access the Axis product by name (host name).

If DHCP is enabled and the product cannot be accessed, run AXIS IP Utility to search the network for connected Axis products, or reset the product to the factory default settings (see page 47) and then perform the installation again.

To use a static IP address, check Use the following IP address and specify the IP address, subnet mask and default router.

IPv6 Address Configuration

If IPv6 (IP version 6) is enabled, the Axis product will receive an IP address according to the configuration in the network router.

To enable IPv6, go to System Options > Network > TCP/IP > Basic. Other settings for IPv6 should be configured in the network router.

ARP/Ping

The IP address can be set using ARP and Ping. For instructions, see the product’s Installation Guide.

ARP/Ping is enabled by default. To disable, uncheck the box under System Options > Network > TCP/IP > Basic.

The ARP/Ping service is automatically disabled two minutes after the product is started, or as soon as an IP address is set. To reset the IP address, the product must be restarted to activate ARP/Ping for an additional two minutes.

Pinging the product is still possible when this service is disabled.

40

Page 39 Page 41
Image 40
Page 39 Page 41
Contents Axis P1343 Network Camera About this document LiabilityIntellectual Property Rights Equipment ModificationsTable of Contents Axis P1343 Network CameraSymptoms, possible causes and remedial actions Performance considerationsHardware overview Hardware overviewConnectors For technical specifications, seeFunction Pin Specifications LED indicatorsColor Indication Maintenance Status LED when using Focus AssistantReplacing the lens Accessing the product Accessing the productAccess from a browser Start a browser Internet Explorer, Firefox, SafariAccess from the Internet Set the root passwordNetwork TCP/IP Advanced Click Create self-signed certificateLive View Controls on the Live ViewPTZ Controls Axis Media Control viewer toolbarAMC Audio controls Axis P1343 Network Camera How to stream H.264 Media streamsMedia streams Axis Media Control AMCAlternative methods of accessing the video stream QuickTimeTM. The following paths can be usedAccessing audio streams Java applet supports simplex audio with G.711 encodingSetting up the product Setting up the productBasic Setup Video and Audio Video and AudioVideo Stream Pixel CounterImage Stream Profiles264 Camera Settings Exposure SettingsImage Appearance White balanceView Area OverlayAudio Settings Privacy MaskFocus Audio ChannelsAudio Input G711 G726Audio Clips Audio OutputLive View Config Default viewer for browsersLive View Config Viewer Settings User Defined LinksOutput Buttons Browser Viewer DescriptionPreset Positions PTZ Pan Tilt ZoomPTZ Pan Tilt Zoom Guard TourAdvanced ControlsDetectors DetectorsCamera Tampering Motion DetectionSet up motion detection Motion detection parametersDefault values Audio detectionRecommended values 15% 60-90% 75-95%Applications ApplicationsSetting Up an Action Rule EventsEvents Convert Event Types to Action RulesSchedules RecipientsRecurrences Axis P1343 Network Camera Recordings RecordingsRecording List Continuous recordingAxis P1343 Network Camera System Options System OptionsSecurity UsersIeee Date & TimeAudio Support Basic TCP/IP Settings NetworkIPv4 Address Configuration IPv6 Address ConfigurationAdvanced TCP/IP Settings Link-Local IPv4 Address NAT traversal port mapping for IPv4QoS Quality of Service Smtp emailStorage UPnPTMRTP/H.264 BonjourMaintenance Ports & DevicesNetwork Share PortsSupport Support OverviewSystem Overview Logs & ReportsReset to factory default settings ScriptingFile Upload Plain ConfigAxis P1343 Network Camera Troubleshooting TroubleshootingEmergency recovery procedure Checking the firmwareProblems setting the IP address Symptoms, possible causes and remedial actionsProduct cannot be accessed from a browser Problems with the H.264 format Product is accessible locally but not externallyStatus and Network indicator LEDs are flashing red rapidly Video and image problems, general Setup Video & Audio Camera SettingsProblems uploading files No images displayed on webSettings Storage and disk management problemsNo audio Poor audio qualityTechnical Specifications Technical SpecificationsMaintenance Installation aids Function/group Specifications Built-inMicrophone Specification Network SecurityPerformance considerations Axis P1343 Network Camera M1.6
Top Page Image Contents