AXIS P1343 Network Camera
Hardware overview
Power
Green Amber
Normal operation.
Flashes green/amber during firmware upgrade.
Note
•The Status LED can be configured to be unlit during normal operation. To configure, go to Setup > System Options > Ports & Devices > LED. See the online help for more information.
•The Status LED can be configured to flash while an event is active.
•The Status LED can be configured to flash for identifying the unit. This can be done under Setup > System Options >
Maintenance.
Status LED when using Focus Assistant
Status | Color | Indication |
|
|
|
| Green | Focus Assistant is enabled |
|
| The lens is optimally adjusted |
| Amber | The camera has been moved, or an object has been inserted in front of the lens. Exit and |
|
| restart the Focus Assistant. |
|
| The lens is less optimally adjusted |
| Red | The camera has been moved, or an object has been inserted in front of the lens. Exit and |
|
| restart the Focus Assistant. |
|
| The lens is poorly adjusted |
|
|
|
Replacing the lens
It is possible to use optional lenses for the Axis product.
To replace the lens:
1.Disconnect the iris cable.
2.Unscrew the standard lens.
3.Attach and screw on the new lens.
8