Axis Communications AXIS P1343 user manual Audio detection, Recommended values, 15% 60-90% 75-95%

Page 31

AXIS P1343 Network Camera

Detectors

Recommended values

5–15%

60–90%

75–95%

 

 

 

 

Default values

15%

90%

90%

 

 

 

 

Tips:

To trigger on small objects or movements, use several small motion detection windows rather than one large window and select a low object size.

To avoid triggering on small objects, select a high object size.

If no objects should appear in the Include Window, select a high history level. This will cause motion detection to trigger as long as the object is present in the window.

To only detect flashing light, select a low sensitivity. In other cases high sensitivity is recommended.

Audio detection

The Axis product can be configured to generate an alarm when audio rises above or falls below the threshold value. The threshold value can be set in the range 0–100 where 0 is the most sensitive and 100 the least sensitive.

1.Go to Detectors > Audio Detection.

2.Set the audio alarm level and click Save.

3.Go to Events > Action Rules and set up an action rule, see Setting Up an Action Rule, on page 33.

Detected audio is indicated by colored peaks in the Activity indicator. An event is triggered when detected audio rises above or falls below the threshold value, which is represented by the bar.

31

Image 31
Contents Axis P1343 Network Camera Equipment Modifications About this documentLiability Intellectual Property RightsAxis P1343 Network Camera Table of ContentsPerformance considerations Symptoms, possible causes and remedial actionsHardware overview Hardware overviewFor technical specifications, see ConnectorsFunction Pin Specifications LED indicatorsColor Indication Maintenance Status LED when using Focus AssistantReplacing the lens Start a browser Internet Explorer, Firefox, Safari Accessing the productAccessing the product Access from a browserClick Create self-signed certificate Access from the InternetSet the root password Network TCP/IP AdvancedControls on the Live View Live ViewPTZ Controls Axis Media Control viewer toolbarAMC Audio controls Axis P1343 Network Camera Axis Media Control AMC How to stream H.264Media streams Media streamsQuickTimeTM. The following paths can be used Alternative methods of accessing the video streamJava applet supports simplex audio with G.711 encoding Accessing audio streamsSetting up the product Setting up the productBasic Setup Pixel Counter Video and AudioVideo and Audio Video StreamImage Stream Profiles264 White balance Camera SettingsExposure Settings Image AppearanceOverlay View AreaAudio Channels Audio SettingsPrivacy Mask FocusG711 G726 Audio InputAudio Output Audio ClipsLive View Config Default viewer for browsersLive View Config Browser Viewer Description Viewer SettingsUser Defined Links Output ButtonsGuard Tour Preset PositionsPTZ Pan Tilt Zoom PTZ Pan Tilt ZoomControls AdvancedMotion Detection DetectorsDetectors Camera TamperingMotion detection parameters Set up motion detection15% 60-90% 75-95% Default valuesAudio detection Recommended valuesApplications ApplicationsConvert Event Types to Action Rules Setting Up an Action RuleEvents EventsSchedules RecipientsRecurrences Axis P1343 Network Camera Continuous recording RecordingsRecordings Recording ListAxis P1343 Network Camera Users System OptionsSystem Options SecurityIeee Date & TimeAudio Support IPv6 Address Configuration Basic TCP/IP SettingsNetwork IPv4 Address ConfigurationAdvanced TCP/IP Settings NAT traversal port mapping for IPv4 Link-Local IPv4 AddressSmtp email QoS Quality of ServiceBonjour StorageUPnPTM RTP/H.264Ports MaintenancePorts & Devices Network ShareLogs & Reports SupportSupport Overview System OverviewPlain Config Reset to factory default settingsScripting File UploadAxis P1343 Network Camera Checking the firmware TroubleshootingTroubleshooting Emergency recovery procedureProblems setting the IP address Symptoms, possible causes and remedial actionsProduct cannot be accessed from a browser Problems with the H.264 format Product is accessible locally but not externallyStatus and Network indicator LEDs are flashing red rapidly No images displayed on web Video and image problems, generalSetup Video & Audio Camera Settings Problems uploading filesPoor audio quality SettingsStorage and disk management problems No audioTechnical Specifications Technical SpecificationsSpecification Network Security Maintenance Installation aidsFunction/group Specifications Built-in MicrophonePerformance considerations Axis P1343 Network Camera M1.6