Bosch Appliances NDN-832 installation manual Camera set-up

30 en Installation FlexiDomeHD 1080p IP Camera

5.7Camera set-up

To help set up the camera for installation:

1.Connect a monitor to the 2.5 mm jack using the optional monitor cable (S1460) which provides a CVBS signal (for installation purposes only).

2.Disconnect the internal network cable.

3.Connect an external network cable with power (PoE).

4.After power-up, wait a little (less than 20 seconds).

5.Press the menu button. This stops the IP video stream and enables the video analog output.

S1460

PoE

1.Menu button

2.Zoom (focal length) and Focus controls

(Position of these controls might differ depending on the lens type. To use the full extension of the focus range, use the lens slip ring or the auto back focus mechanism.)

AM18-Q0601 v1.0 2012.01 Installation Manual Bosch Security Systems