FlexiDomeHD 1080p IP Camera | Installation en 35 |
|
|
4.Briefly press the Menu button to start the automatic motorized back focus (Auto MBF) adjustment.
–You will hear the motorised automatic back focus process running.
–The progress is shown on the monitor.
5.If the camera is not correctly focussed, press the Menu button for a longer time to restart the wizard.
6.If the camera is correctly focussed, briefly press the Menu button to save the results.
–The back focus position is stored.
–The iris is set to its original value.
–The video service output is disabled.
5.10Closing the unit
When the camera position is set and all adjustments have been made, close the unit.
1.Disconnect the temporary external network cable.
2.Reconnect the internal network cable.
3.Place the camera window section on the camera module and ensure that:
–the connecting wires are not trapped or disconnected,
–the rubber gasket fits snugly.
4.Using the supplied screwdriver bit, secure the camera window section to the camera module by tightening the two screws (maximum torque 3.5
Bosch Security Systems | Installation Manual |