Bosch Appliances NDN-832 installation manual Using the install wizard, Adjustment procedure

Page 34

34 en Installation

FlexiDomeHD 1080p IP Camera

 

 

5.9Using the install wizard

The Menu button on the control panel is used to access the camera install wizard. When there is a choice in the wizard, the options are selected by either a short press or a longer press of the button.

The wizard handles the following functions:

Lens identification

Zoom and focus adjustment conditions

Image orientation

Auto back focus

Run the wizard to adjust the focus. This optimizes picture sharpness in both bright and low-level lighting.

5.9.1Adjustment procedure

If you have set up the camera and pressed the Menu button as described in Section 5.7 Camera set-up, page 30 then you see the following on the monitor screen:

Lens type

MBF feedback

Auto MBF

 

180°

 

MBF info

The lens type is identified and shown on the screen.

The iris is opened to its maximum value.

1.Manually adjust the focal length (zoom) on the lens to obtain the required field of view.

2.Manually adjust the focus on the lens to obtain the sharpest image possible.

3.To rotate the image 180°, press and hold the Menu button until the image flips.

AM18-Q0601 v1.0 2012.01

Installation Manual

Bosch Security Systems

Image 34
Contents FlexiDomeHD 1080p IP Camera Page Table of Contents Troubleshooting InstallationCamera configuration MaintenanceTechnical Data 10.1 Specifications 10.1.1 DimensionsSafety Safety precautionsImportant safety instructions Type label Connection in applicationsGrounding FCC & Ices compliance FCC & Ices InformationUL certification MicroSD cardsDisclaimer Bosch notices Copyrights Features IntroductionSystem Information Overview of functionsAudio Alarm I/OPower-over-Ethernet Tamper detection and motion detectionEncryption ConfigurationRecording Bosch Video Client Operation with external systemsBosch Video Management System Bosch Recording StationUnpacking PlanningSystem requirements Installation PartsMounting the unit Surface mountingFlexiDomeHD 1080p IP Camera Installation en Flush mount Figure?5.2?Flush mountingFlexiDomeHD 1080p IP Camera Installation en Connections Wire colorSignal Make the connectionsAlarm Input Power connectionNetwork and PoE connection Alarm output Audio in / Audio outMount the camera module M 1 N-mOpening the camera module Controls Camera set-up Camera positioning 1 PanTilt Twist Using the install wizard Adjustment procedureClosing the unit Camera configuration Day/Night switchingBrowser connection Protected networkTroubleshooting Function testResolving problems Malfunction Possible causes SolutionLivepage Functions Customer service For example 192.168.0.80/versionCommunication with Terminal Program MaintenanceTesting the network connection Data TerminalAssigning an IP Address Configuring the TerminalCommand Inputs 192.168.0.1Transfer and disposal RebootRepairs Additional ParametersTechnical Data SpecificationsIP, IBP, Ibbp 10.1.1 Dimensions En Technical Data FlexiDomeHD 1080p IP Camera Page Bosch Security Systems