Panasonic WV-CL924A operating instructions Electronic Sensitivity Enhancement Sens UP

5.Electronic Sensitivity Enhancement (SENS UP)

There are two modes for SENS UP.

AUTO: If you select x32 AUTO, for example, the sensitivity is raised automatically to x32 max. When AUTO is selected, AGC is automatically set to ON.

FIX: If you select x64 FIX, for example, the sensitiv- ity is raised to just x64.

** CAM SET UP **

CAMERA ID		OFF	↵
ALC/ELC		ALC	↵
SHUTTER		OFF
AGC		ON (DNR-H)
SENS UP		OFF
SYNC		INT
WHITE BAL		ATW1 ↵
MOTION DET		OFF
LENS DRIVE		DC
END	SET UP ENABLE

Notes:

•While the SENS UP function is selected, noise, spots or a whitish phenomenon may appear in the picture when the sensitivity of the camera is increased. This is a normal phenomenon.

•x64FIX does not appear for the SENS UP parame- ter on the system controller setup menu.

•In case of using the WV-CU204 or WV-CU254 Controller, status does not appear correctly for the SENS UP parameter on the setup menu.

Move the cursor to the SENS UP parameter and select the parameter for electronic sensitivity enhancement. The preset values for SENS UP (electronic sensitivity

enhancement) change by pressing or as fol- lows:

OFF X2 AUTO X4 AUTO X6 AUTO X10 AUTO X16 AUTOX32 AUTO

X64 FIX X32 FIX X16 FIX X10 FIX X6 FIX X4 FIX X2 FIX OFF

-27-