Panasonic WV-CL924A operating instructions Specifications, Agc

768 (H) x 494 (V) pixels, Interline Transfer CCD

6.45 (H) x 4.84 (V) mm (Equivalent to scanning area of 1/2” pick-up tube)

525 lines/60 fields/30 frames

15.734 kHz

59.94 Hz

Internal, Line-locked, External (VS/VBS) or Multiplexed Vertical Drive (VD2) selectable

1.0 V[p-p] NTSC composite 75 Ω /BNC connector 480 lines (C/L), 570 lines (B/W)

50 dB (AGC OFF, weight ON)

0.3 lx (0.03 footcandle) at F1.4 (C/L), 0.02 lx (0.002 footcandle) at F1.4 (B/W) AGC ON or OFF (SET UP MENU) selectable

ATW1, ATW2 or AWC (SET UP MENU) selectable Variable (SET UP MENU)

Equivalent to continuous variable shutter speeds between 1/60 s and 1/10 000 s ON (DNR-H), ON (DNR-L) or OFF (SET UP MENU) selectable

Preset ON or OFF (SET UP MENU) selectable

1/60 (OFF), 1/100, 1/250, 1/500, 1/1 000,1/2 000,1/4 000, 1/10 000 s selectable CS-mount

DC or Video selectable –10°C - +50°C (14°F - 122°F) Less than 90 %

WV-CL920: 120 V AC 60 Hz 4.8 W

WV-CL924: 24 V AC 60 Hz 4.9 W 12 V DC 460 mA

-40-

SPECIFICATIONS

Pick-up Device:

Scanning Area:

Scanning:

Horizontal:

Vertical:

Synchronization:

Video Output:

Horizontal Resolution:

Signal-to-Noise Ratio:

Minimum Illumination:

Gain Control:

White Balance:

Aperture:

Electronic Light Control:

AGC:

Backlight Compensation:

Electronic Shutter Speed:

Lens Mount:

ALC Lens:

Ambient Operating Temperature:

Ambient Operating Humidity:

Power Source and

Power Consumption: