Axis Communications 2400, 2401 manual Verifying and Completing the Installation From Your Browser

10 Installing on a Network AXIS 2400/2401 Admin Manual

❺Connect the power supply to the unit and connect it to your main power supply.

❻Approximately 10-15 seconds after connecting the power supply, the message ‘Reply from 172.21.1.200...’ - or similar, is returned within the window. Ensure that the Power Indica- tor is permanently lit and that the Network Indi- cator flashes intermittently.

❼Exit ping. The installation is now complete, and you are ready to access the AXIS 2400/2401 from your browser, as described in the next section.

Power Supply

Connector

Network Indicator Power Indicator

Verifying and Completing the Installation From Your Browser

❶Start your browser and enter the IP address of the AXIS 2400/2401 in the location/address field.

❷Click the Installation Wizard. The wizard guides you through the remaining installation procedures.

Important!

•Upon delivery, the AXIS 2400/01 is configured for open access (anonymous users). The unit is sup- plied with one pre-configured Administrator username and password, set to root and pass, respec- tively. The Administrator password must be changed immediately to prevent unauthorized access to the Admin Tools and/or product images, as defined in the Security Settings.

•To enable the updating of images in Microsoft Internet Explorer, set your browser to allow ActiveX controls and perform a once-only installation of Axis' ActiveX component onto your workstation. If your working environment restricts or prohibits the downloading of additional software components, you can alternatively, from the Image Settings, configure your AXIS 2400/01to use a Java applet for updating the images. Refer to the online Help for more information.