Product Description

AXIS 2400/2401 Admin Manual

Product Description

Read the following information to familiarize yourself with the AXIS 2400/2401, making particular note of where the connectors and indicators are located.

AXIS 2400 Front Panel

Status Indicator

The multi-colored status indicator shows the operational status of the server, as described below:

•green - the indicator flashes briefly and momentarily displays orange during the start-up and self-test routines; the indicator then displays green to indicate a healthy unit sta- tus.

•red - the indicator will display red only if a problem with the AXIS 2400 has occurred

•orange - flashes orange when reset- ting the factory default settings.

Network Indicator

After completion of the startup and self test routines, the multi-colored Network Indicator flashes independently, as fol- lows:

•yellow - indicating net- work activity on a 10Mbps Ethernet network

•green - indicating network activity on a 100Mbps Fast Ethernet network

•red - indicating no physical connection to the network.

DIP Switches

A corresponding line termination switch for each of the supported video outputs. All units are shipped with the line termination enabled for each supported video input; that is, with the DIP switches set in the down-position. If the AXIS 2400 is to be con- nected in parallel with other equipment, disable the input ter- mination by turning the corre- sponding DIP switch to the up-position (OFF). Failure to do this can cause the picture quality to be impaired.

AXIS

STATUS

NETWORK

POWER

Power Indicator

The Power indicator is normally lit while power is applied. If it is not lit, or it flashes, there is a problem with the AXIS 2400 external power source.

Serial Number

Located on the underside label of the AXIS 2400, the serial number is identical to the Ethernet address of the unit.

Video Server

VIDEO 1	VIDEO 2		VIDEO 3	VIDEO 4
	1 2 3 4


	75	ON

http://www.axis.com

Control Button

This button is recessed within the product cas- ing. Using a suitably pointed object, press this button to restore the factory default settings, as described in Network Settings, on page 20.

Video Inputs

Accommodates up to 4 separate video sources (VIDEO 1- VIDEO 4) simultaneously.

Each supported video input is terminated using a coax/BNC connector. Physical connections made using RG59, 75 Ohm coax video cable; have a rec- ommended maximum length of 800 feet (250 meters).