Canon VB150 appendix Cannot control the camera, Cannot record or search pictures, This file

Page 101

I cannot control the camera.

●Check that the RS-232C cable for camera control is connected correctly. (→ P.27)

●Check that the VB150 control port for the corresponding camera is set correctly. (→ P.54)

●Check to see if the camera control is restricted (→ P.54) or the camera angle is restricted by a preset (→ p.45).

●If multiple VC-C4/VC-C4Rs are cascade connected, check that the cables are connected correctly and that the settings are specified properly (→ P.41).

●Check whether the camera control port is set to "Not Controlled" (→ P.41).

I cannot record or search pictures.

●Check that the flash memory card has been inserted properly. (→ P.111)

●When the number of recorded pictures exceeds the limit, erase pictures that you do not need or replace the memory card (→ P.46, 57).

●Check that the power to the camera is on and the cable has been connected properly. (→ P.27)

●The system tried to record the picture, but the picture may be bigger than the Max Picture Size specified on the VB150. Set a larger value as the Max Picture Size (→ P.46).

●If there is an error in the search results, try to recover the index (/card/images/index.vbi). Click on the "Rebuild" button (Rebuilding of recorded picture list) on the Administration Tools settings page to recover the index (→ P.57).

The wireless LAN card does not work and communication fails.

●If you are using Infrastructure mode, check whether the ESS ID specified on the VB150 matches the ESS ID of the access point (→ P.37).

●If you are using Ad-Hoc mode, check that the channel set on the VB150 matches channel on the PC (→ P.37).

●If you are using Infrastructure mode, check with the network administrator to determine whether you have access privileges to the access point.

●If the encryption key is enabled (→ P.37), check that the specified encryption key is the same as that used by the other party.

●If the wireless LAN card inserted in the VB150 and the wireless LAN devices used by the other party are made by different manufacturers, the connection itself may not be guaranteed to work correctly. Check with the wireless LAN device manufacturer.

●There may be something in the installation location that is blocking the radio waves (such as a concrete or metal wall) or there may be something generating radio interference (such as a cordless phone). Change the installation location and try again.

c ● If you have a problem, consult the ReadMe also. The ReadMe file may

Note

contain important information not included in this manual. Be sure to read

 

 

this file.

●The latest information is available at the following. URL: http://www.canon.com/webview/)

Appendix

100

Page 100 Page 102
Image 101
Page 100 Page 102
Contents VB150 Exclusion of Liability IntroductionCopyright Information Trademark NoticesChecking the Package Contents Contents 103 101104 107Using the Still Picture Recording Function Viewer for PC SettingsUsing the Motion Detection Function IntroductionThis document Picture Recording User’s Guide How to Read This ManualGuide to Creating Web Pages for Video Distribution Viewer SoftwareImportant Operational Instructions Safe Use of EquipmentImportant Warnings FCC Notice Important Safety Instructions Safe Use of Equipment Page Cleaning the Equipment MaintenancePage Before Using the VB150 Panorama picture creation function and various settings Compatible with wireless LANsCamera position preset function WebView Livescope builtView restriction function Easy setting and administrationBuilt-in Web server and FTP server Plenty of expandabilityVideo Distributor System OverviewViewer Software Supplied Operating Environment VB Administration Tools Ver .1 → P.59VBCollector Ver .1 → dPicture Recording User’s Guide P.13 Viewer for Java VerCompatible Cameras Sold separately Viewer Software for Monitoring Use Sold separatelyCompatible Networks Compatible PC Cards Sold separatelySystem Components and Their Operation 100/10 BT Ethernet connector Factory defaults reset switchCamera control connector CC1, CC2 PC card slot BPage Setting Up the VB150 Connecting the camera Setup WorkflowChecking operation Camera connection is now complete Connecting the cameraInitializing the VB150 Precautions for Turning the VB150 On and OffClick to select Initial settings are now complete Operation checking is now complete Checking operationWe recommend that you create a panorama picture → P.65 Example of Viewer for JavaDetail Settings Settings Title Detail SettingsAccessing the Settings Title Parallel Settings TitleAdministration Account System SettingsSettings Web page URL OthersEthernet Network SettingsWireless LAN Installation location and communications securityWith the new IP address → P.34 ConnectionsPPP Primarily CallPPPConnection Keeping Static Route ControlSettings for cameras 1 to Camera and Video SettingsCommon Settings View Restriction Connected to 2 camera control connectors Connected to 1 camera control connectorExample of 4 cameras cascade Example of 2 cameras cascadeTouching it, be sure to reboot the VB150. → P.57 View Restriction SettingsControllable Range and Video Capture Range Controllable Range and Video Capture Range for Each CameraAbout View Restriction Common Setting Preset SettingsPresets Up to 8 presets can be specified Web Pages for Video Distribution P.9Picture Recording Common Settings Picture Recording and External Device I/O SettingsStart up the Viewer for PC then check the Size value →dPicture Recording Users Guide P.13Description Values Specifying parameters in Picture Mail messagesExternal Device Common Settings Use the Motion Detection Setting Tool → P.80For picture recording and external device Control based on motion detectionPicture Recording Triggered by External Devices Been reached Method varies with the environment being usedExample Picture Recording and Output byAuthorized/Restricted Host Specification → P.52 Access Control SettingsAuthorized User Account → P.52 Users can be registeredAuthorized/Restricted Host List Descriptions Example 1 To prohibit access from a hostListing Format Listing GuidelinesPage Webview Livescope Settings Http Server Miscellaneous SettingsMail Log Flash memory card is inserted into the slot on the VB150Log.0... are created Miscellaneous Administration Tools SettingsOn-board File System Information Slot A/BVB Administration Tools Panorama Creation Tool → P.65 Overview of VB Administration ToolsVBAdmin Startup Panel → P.63 Motion Detection Setting Tool → P.80 Preset Setting Tool → P.75Admin Viewer → P.92 View Restriction Tool → P.70To Install Installing VB Administration ToolsBe installed → P.19 WebView Livescope Helper Viewer Ver .1 or earlier VB Administration Tools Ver.1.0WebView Livescope Camera Server WebView Livescope ManagerTo Start Up Starting Up VB Administration ToolsViewer and Admin Viewer can be started up at the same time With a panorama picture Panorama Creation ToolWithout a panorama picture Panorama shot, be sure to click this button Panorama Creation Tool Display ScreenDisplay ranges of the panorama pictures are different Capturing Panorama PicturesVC-C4 panorama picture VC-C4R panorama pictureTo Delete Updating/Deleting Panorama PicturesDisplaying Connection Information ReconnectingOpening/Saving Pictures View Restriction Tool View Restriction Tool Display Screen To save the settings to the VB150View Restriction Tool To Make Settings Setting View RestrictionsChanging Settings from the View Restriction Preview Frame Restriction on from the Privilege menu → P.94 Setting presets using the Preset Setting Tool Preset Setting ToolReflecting preset settings to the viewer Preset Setting Tool Display Screen Page Changing Settings from the Preset Preview Frame Setting PresetsConnected Motion Detection Setting Tool Motion Detection Setting Tool Display Screen Motion Detection Setting Tool Scheduled motion detection Specifying the Motion Detection Function SettingsContinuous motion detection Choose -Not Specified- in the Detection preset selection box Setting the detection location and areaSetting the sensitivity Setting the motion detection parametersSetting the Action Performed Setting the area ratioSetting the duration Displaying Motion Detection Status of the Server ErrorsMotion detection status of the server display may not match Motion detected peak display in this toolSaving Settings to the VB150 Setting the Frame RateTo Download Log ViewerDownloading Log Files To Set Selection Criteria Using selection criteria to display logsViewing the Log Recording Application Log messages related to applications → P.23Http Server Log messages related to the Http server → P.27 These log messages refer to the system’s Http serverAbout the special privileges of administrators Admin ViewerStarting Up Admin Viewer To Set External Device Input Operating External DevicesDisplaying and saving the external device input status Enabling/Disabling View Restrictions To Enable or Disable View RestrictionsOperating External Device Output To Set External Device OutputAdvanced Camera Control Operating a CameraClicking the screen to control the camera Controlling NU-700 Appendix Troubleshooting Cannot control the camera Wireless LAN card does not work and communication failsCannot record or search pictures This fileWire connection of the camera control cable RS-232C SpecificationsExternal Device Output Terminals Out1, Out2 External Device I/O TerminalsExternal Device Input Terminals In1, In2 Viewer for Java System ConfigurationViewer for PC VB150Sample LAN Environment Configuration Sample Network ConfigurationsSample Dialup Environment Configuration Be sure to assign a fixed IP address on the VB150Sample ISP Environment Configuration Sample LAN plus Dialup Environment ConfigurationSample Wireless LAN Environment Configuration Upgrading the Firmware Remotely Use the procedure below to perform the remote upgradeObtain the new firmware Launch the vb150rfu.exe program on the enclosed CD-ROMInitializing settings other than system/network settings Restoring the Factory Default SettingsInitializing all settings Factory default settings using the Restore button → P.109Setting Item Setting 1 y m d Item setting 2 y m d Factory Default Setting110 Procedure for Using Flash Memory Cards Using a PC CardInsert the flash memory card Into the VB150 To use a Web browser as an FTP clientConnection information Index113 114 Imprimé AU Japon
Top Page Image Contents