System Settings Page
Use this page to set the administrator ID and password as well as the date and time.
Others
"Device Name"
Sets the device name. The device name is used as the subject in log mail (→ P.55), as a message body parameter specification in picture mail (→ P.47) and is used in MV 2.1 (→ MV Manual P.23). The device name can consist of up to 31 alphanumeric characters and can include underscores and hyphens.
Example: If
Subject: Syslog message from
Administration Account
"Administrator ID"
Sets the ID used by the administrator. Up to 15 characters can be set consisting of alphanumeric characters, underscores and hyphens. The default setting is "root".
"Password"
Sets the password. Up to 15 ASCII characters can be used (spaces or printable characters). The default setting is "VB150".
"Confirm password"
Confirms the password in the field above.
Settings Web page URL
Sets the "path" component for the settings title page (→ P.34). This URL is used subsequently when you access the settings title page after restarting the system. (Up to 31 characters can be set consisting of alphanumeric characters, underscores and hyphens.).
The default setting is "admin".
Date and Time
"Time difference with Greenwich Mean Time" The factory default time difference setting is set to +9 hours from Greenwich Mean Time. Please change this setting as needed.
You can only change the date and time on the VB150 when the "Set the clock to the following time" option is ticked. Because this setting is returned to the VB150 when the "Send Config. and Reboot VB150" button is clicked, the values for the settings from year to second must be matched to the time when the button is clicked.
c
Note
●For reasons of system security, we recommend that you change the administrator ID and password at regular intervals. It is also a good idea to change the URL of the settings page. However, be sure to make a note of the new settings (→ P.109) so that you do not forget them.
●If you have forgotten the Administrator ID or password, press the Factory Defaults Reset switch to return these settings to their factory default values (→ P.108). However, note that all settings are returned to the factory default settings.
Click the [OK] button to change the settings. To discard the changes, click the
[Cancel] button. This returns you to the settings title page.
35