Canon VB150 appendix FCC Notice

Page 9

FCC NOTICE

Network Camera Server VB150 (D78-0147)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.

Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment.

Canon U.S.A. Inc.

One Canon Plaza, Lake Success, NY 11042, U.S.A. Tel No. (516) 328-5600

IC NOTICE

This product does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Interference-causing equipment standard entitled ‘Digital Apparatus’, ICES-003 of the Industry Canada.

NOTIFICATION IC

Cet appareil numériquw respecte les limites de bruits radioélectriques applicables aux appareils numériques de Classe B prescrites dans la norma sur le matériel brouilleur: “Appareils Numériques”, NMB-003 édictées par I’lndustrie Canada.

Dieses Produkt ist zum Gebrauch im Wohnbereich, Geschäfts- und Gewerbebereich sowie in Kleinbetrieben vorgesehen.

Introduction

9

8

 

 

Page 8 Page 10
Image 9
Page 8 Page 10
Contents VB150 Exclusion of Liability IntroductionCopyright Information Trademark NoticesChecking the Package Contents Contents 103 101104 107Using the Still Picture Recording Function Viewer for PC SettingsUsing the Motion Detection Function IntroductionThis document Picture Recording User’s Guide How to Read This ManualGuide to Creating Web Pages for Video Distribution Viewer SoftwareSafe Use of Equipment Important WarningsImportant Operational Instructions FCC Notice Important Safety Instructions Safe Use of Equipment Page Cleaning the Equipment MaintenancePage Before Using the VB150 Panorama picture creation function and various settings Compatible with wireless LANsCamera position preset function WebView Livescope builtView restriction function Easy setting and administrationBuilt-in Web server and FTP server Plenty of expandabilityVideo Distributor System OverviewViewer Software Supplied Operating Environment VB Administration Tools Ver .1 → P.59VBCollector Ver .1 → dPicture Recording User’s Guide P.13 Viewer for Java VerCompatible Cameras Sold separately Viewer Software for Monitoring Use Sold separatelyCompatible Networks Compatible PC Cards Sold separatelySystem Components and Their Operation 100/10 BT Ethernet connector Factory defaults reset switchCamera control connector CC1, CC2 PC card slot BPage Setting Up the VB150 Connecting the camera Setup WorkflowChecking operation Camera connection is now complete Connecting the cameraInitializing the VB150 Precautions for Turning the VB150 On and OffClick to select Initial settings are now complete Operation checking is now complete Checking operationWe recommend that you create a panorama picture → P.65 Example of Viewer for JavaDetail Settings Detail Settings Accessing the Settings TitleSettings Title Parallel Settings TitleAdministration Account System SettingsSettings Web page URL OthersEthernet Network SettingsWireless LAN Installation location and communications securityWith the new IP address → P.34 ConnectionsPPP Primarily CallPPPConnection Keeping Static Route ControlCamera and Video Settings Common SettingsSettings for cameras 1 to View Restriction Connected to 2 camera control connectors Connected to 1 camera control connectorExample of 4 cameras cascade Example of 2 cameras cascadeTouching it, be sure to reboot the VB150. → P.57 View Restriction SettingsControllable Range and Video Capture Range Controllable Range and Video Capture Range for Each CameraAbout View Restriction Common Setting Preset SettingsPresets Up to 8 presets can be specified Web Pages for Video Distribution P.9Picture Recording Common Settings Picture Recording and External Device I/O SettingsStart up the Viewer for PC then check the Size value →dPicture Recording Users Guide P.13Description Values Specifying parameters in Picture Mail messagesExternal Device Common Settings Use the Motion Detection Setting Tool → P.80For picture recording and external device Control based on motion detectionPicture Recording Triggered by External Devices Been reached Method varies with the environment being usedExample Picture Recording and Output byAuthorized/Restricted Host Specification → P.52 Access Control SettingsAuthorized User Account → P.52 Users can be registeredAuthorized/Restricted Host List Descriptions Example 1 To prohibit access from a hostListing Format Listing GuidelinesPage Webview Livescope Settings Miscellaneous Settings MailHttp Server Flash memory card is inserted into the slot on the VB150 Log.0... are createdLog Miscellaneous Administration Tools SettingsOn-board File System Information Slot A/BVB Administration Tools Overview of VB Administration Tools VBAdmin Startup Panel → P.63Panorama Creation Tool → P.65 Motion Detection Setting Tool → P.80 Preset Setting Tool → P.75Admin Viewer → P.92 View Restriction Tool → P.70Installing VB Administration Tools Be installed → P.19To Install WebView Livescope Helper Viewer Ver .1 or earlier VB Administration Tools Ver.1.0WebView Livescope Camera Server WebView Livescope ManagerTo Start Up Starting Up VB Administration ToolsViewer and Admin Viewer can be started up at the same time Panorama Creation Tool Without a panorama pictureWith a panorama picture Panorama shot, be sure to click this button Panorama Creation Tool Display ScreenDisplay ranges of the panorama pictures are different Capturing Panorama PicturesVC-C4 panorama picture VC-C4R panorama pictureTo Delete Updating/Deleting Panorama PicturesReconnecting Opening/Saving PicturesDisplaying Connection Information View Restriction Tool View Restriction Tool Display Screen To save the settings to the VB150View Restriction Tool Setting View Restrictions Changing Settings from the View Restriction Preview FrameTo Make Settings Restriction on from the Privilege menu → P.94 Preset Setting Tool Reflecting preset settings to the viewerSetting presets using the Preset Setting Tool Preset Setting Tool Display Screen Page Changing Settings from the Preset Preview Frame Setting PresetsConnected Motion Detection Setting Tool Motion Detection Setting Tool Display Screen Motion Detection Setting Tool Specifying the Motion Detection Function Settings Continuous motion detectionScheduled motion detection Choose -Not Specified- in the Detection preset selection box Setting the detection location and areaSetting the sensitivity Setting the motion detection parametersSetting the area ratio Setting the durationSetting the Action Performed Displaying Motion Detection Status of the Server ErrorsMotion detection status of the server display may not match Motion detected peak display in this toolSaving Settings to the VB150 Setting the Frame RateLog Viewer Downloading Log FilesTo Download Using selection criteria to display logs Viewing the LogTo Set Selection Criteria Recording Application Log messages related to applications → P.23Http Server Log messages related to the Http server → P.27 These log messages refer to the system’s Http serverAdmin Viewer Starting Up Admin ViewerAbout the special privileges of administrators Operating External Devices Displaying and saving the external device input statusTo Set External Device Input Enabling/Disabling View Restrictions To Enable or Disable View RestrictionsOperating External Device Output To Set External Device OutputAdvanced Camera Control Operating a CameraClicking the screen to control the camera Controlling NU-700 Appendix Troubleshooting Cannot control the camera Wireless LAN card does not work and communication failsCannot record or search pictures This fileWire connection of the camera control cable RS-232C SpecificationsExternal Device I/O Terminals External Device Input Terminals In1, In2External Device Output Terminals Out1, Out2 Viewer for Java System ConfigurationViewer for PC VB150Sample LAN Environment Configuration Sample Network ConfigurationsSample Dialup Environment Configuration Be sure to assign a fixed IP address on the VB150Sample ISP Environment Configuration Sample LAN plus Dialup Environment ConfigurationSample Wireless LAN Environment Configuration Upgrading the Firmware Remotely Use the procedure below to perform the remote upgradeObtain the new firmware Launch the vb150rfu.exe program on the enclosed CD-ROMInitializing settings other than system/network settings Restoring the Factory Default SettingsInitializing all settings Factory default settings using the Restore button → P.109Setting Item Setting 1 y m d Item setting 2 y m d Factory Default Setting110 Procedure for Using Flash Memory Cards Using a PC CardInsert the flash memory card Into the VB150 To use a Web browser as an FTP clientConnection information Index113 114 Imprimé AU Japon
Top Page Image Contents