Cisco Systems CIVS-IPC-2600 manual Administrator, User List

Page 35

Chapter 3 Configuring and Managing the IP Camera

Administration Windows

Table 3-6describes the options in the Users window.

Table 3-6 Users Window Options

Option

Description

 

 

Administrator

 

 

 

User ID

Display only. The user ID for the IP camera administrator is Admin.

 

The administrator can access the configuration windows for the IP camera,

 

control all IP camera functions, view video from the IP camera, and access

 

the Administrator windows

 

 

User name

Display only. The user name for the IP camera administrator is admin (all

 

lower case).

 

 

Password

Enter a password for the IP camera administrator.

 

The password must contain least 8 characters, which can be letters, numbers,

 

and special characters, but no spaces. It is case sensitive.

 

Note You can also set this password and configure other requirements for

 

it in the Initialization window as described in the “Initialization

 

Window” section on page 3-25.

 

 

Confirm Password

Re-enter the password for the administrator.

 

 

User List

 

 

 

User ID

Display only. There are 20 default user IDs, User 1 through User 20.

 

 

User Name 1 – 20

Enter a unique name for the user.

 

The name can include up to 32 letters and numbers. It is case sensitive.

 

 

Password

Enter a password for the user.

 

The password is case sensitive and must contain at least 8 characters, which

 

can be letters, numbers, and special characters, but no spaces. Special

 

characters are: ! " # $ % & ' ( ) * + , - . : ; < = > ? @ [ \ ] ^ _ ` { } ~.

 

 

Confirm Password

Re-enter the password for the user.

 

 

Privilege Level

Choose the desired privilege level for the user:

 

Administrator—Same as the IP camera administrator. Allows the user

 

to access the configuration windows for the IP camera, view video in the

 

Home window, and access all controls in the Home window.

 

Monitor—Allows the user to view video in the Home window and to

 

access all controls in the Home window.

 

Viewer—Allows the user to view video in the Home window and to

 

access these controls in the Home window: resolution, digital zoom,

 

snapshot, speaker on/off, speaker volume, microphone on/off,

 

microphone volume.

 

 

 

 

Cisco Video Surveillance 2600 IP Camera User Guide

 

 

 

 

 

 

OL-24127-02

 

 

3-13

 

 

 

 

 

Image 35
Contents Americas Headquarters Cisco Video Surveillance 2600 IP Camera User GuideCisco Video Surveillance 2600 IP Camera User Guide Organization OverviewPreface Cisco Video Surveillance 2600 IP Camera User Guide Iii N T E N T SUsing the IP Camera with Cisco VSM A-1 Features, IP Camera Overview, FeaturesPhysical Details IP Camera OverviewBack Focus on the IP Camera section on Basic Setup Window section onRear of IP Camera Described in the Resetting the IP Camera section onSide of IP Camera Package Contents DC Auto Iris Lens Connector PinoutsGetting Started Installing the Cisco Video Surveillance IP CameraAction Explanation Action Explanation Performing the Initial Setup of the IP Camera Protocol//ipaddress ProcedureHttps//192.168.0.100 Accessing the IP Camera WindowsHttp//203.70.212.521024 Adjusting Back Focus on the IP CameraHttps//203.70.212.521024 Http//203.70.212.52Initial Setup of the IP Camera Powering the IP Camera On or OffResetting the IP Camera Reset Type Procedure RemarksCleaning the IP Camera OL-24127-02 Configuration Overview Configuring and Managing the IP CameraConfiguration Item Explanation Guidelines for Use Reference See the Privacy Region See the Alarm I/O PortsPreset Positions See the Audio Window sectionSee the Video Log Window Navigating the Configuration WindowsSee the Syslog & Log Window Basic Setup Window Setup WindowsOption Description Device SettingsNetwork Settings Advanced Setup WindowBonjour OptionOption Description QoS IP Filter WindowEAP-FAST Options Eapol WindowEAP-TLS Options Users Window Administration WindowsUsers Window, Maintenance Window, Firmware Window, User List AdministratorMaintenance Window Firmware Window Video Window, Audio Window, Privacy Region Window, Audio/Video WindowsVideo Window Settings Dual Streams MPEG-4 + Mjpeg -Configures MPEG-4 forMPEG-4 Settings Resolution Choose the resolution of the Mjpeg video stream Mjpeg SettingsPAL/50 Hz Video AdjustmentDay/Night Vision OptionsOption Description Audio Window Full Duplex Talk and Listen Privacy Region WindowDuplex Talk and Listen Choose Simplex Talk Only , Half Duplex Talk or Listen , orInitialization Window Security WindowsProduct Process Window Users Window section on Complexity WindowMail & FTP Window Applications WindowsSecondary Smtp Server Described in the Basic Setup Window section onMail Setup Primary Smtp ServerSecondary FTP Motion Detection WindowMail Body Primary FTPEvent Window Trigger Event Event ScheduleNew Schedule Clear buttonAttachment Messages, see the Mail & FTP Window section onSnmp Window Manual Control Settings Alarm I/O Ports WindowAlarm Input Settings Alarm Output SettingsPTZ RS-485 Window Port SettingsPreset Position Zoom Out button Preset Positions WindowPatrol Sequence Zoom In buttonFocus Near button Focus Far buttonSystem Window Information, see the Basic Setup Window section onMore information, see the Basic Setup Window section on Status WindowsAudio/Video Window Audio SettingSyslog & Log Window Network WindowSys Log Server Local LogSystem log messages Log ListMessage Explanation Syslog and Log Information Address FTP log messages Address1 Port1 Address2 Port2 , UserSmtp log messages Video Log WindowDelete All button Delete buttonOL-24127-02 Home Window Overview Viewing Video through the Home Window OverviewHome Window Audio controls Home Window ControlsControl Description Digital zoom controlsFor related information, see the Video Window section on Snapshot controlsSave IP camera controlsInformation, see the PTZ RS-485 Window section on PTZ RS-485 Window section onViewing Video through Third-Party Devices or Software Accessing Dual MPEG-4 Streams Accessing the Primary H.264 StreamAccessing Secondary H.264 Stream Accessing the Primary MPEG-4 StreamAccessing Dual Streams MPEG-4 + Mjpeg Accessing the Mjpeg StreamAccessing Dual Streams H.264 + Mjpeg Troubleshooting Troubleshooting For instructions, see the Video Window section on Using the IP Camera with Cisco VSMOL-24127-02 IN-1 D EIN-2 IN-3 DSCP, for QoS Dual streamingIN-4 HttpsIN-5 SdramIN-6 MjpegIN-7 See PTZIN-8 IN-9 IN-10