Cisco Systems CIVS-IPC-2600 manual Address1 Port1 Address2 Port2 , User, FTP log messages

Page 67

Chapter 3 Configuring and Managing the IP Camera

Status Windows

Table 3-26

Syslog and Log Information (continued)

 

 

 

Message

 

Explanation

 

 

Stream: RTSP stream started. [ip: Type, UDP:

Provides information when an RTSP stream from

Address_1:Port_1 ->Address_2:Port_2, User]

the IP camera is initiated (RTSP stream started) or

 

 

stopped (RTSP stream stopped).

Stream: RTSP stream stopped. [ip: Type, UDP:

 

Address_1:Port_1 ->Address_2:Port_2, User]

Type is the type of stream (Video or Audio).

 

 

Address_1:Port_1 are the IP address and port

 

 

number of the IP camera. Address_2:Port_2 are IP

 

 

address and port number of the device that

 

 

receives the stream. User is the IP camera user

 

 

name of the user who started or stopped the

 

 

stream.

 

 

successful admin user login.

A user with administrator privileges logged in to

 

 

the IP camera.

 

 

successful view only user login.

A user with viewer privileges or monitor

 

 

privileges logged in to the IP camera.

 

 

System: Cancel upgrade process

An IP camera administrator cancelled a firmware

 

 

upgrade that was in process.

 

 

System: Invalid upgrade file

You are attempting to upgrade firmware for the IP

 

 

camera but are using and invalid firmware file.

 

 

System: Reset to factory defaults.

Factory reset procedure performed for the IP

 

 

camera.

 

 

Unsuccessful login attempt.

A user tried but was unable to log in to the IP

 

 

camera.

 

 

Web: Invalid login attempt. [id: User_ID, ip:

Provides information when someone logs in, or

Address]

 

attempts to log in, to the IP camera.

 

 

Web: User logged in to web UI. [id: User_ID, ip: User is the IP camera user name of the user.

Address]

 

Address is the IP address of the PC that was used.

Web: User logged out from web UI. [id: User_ID,

ip: Address]

FTP log messages.

Note These messages appear if you enable the FTP Log option.

FTP: Error during the connection or timeout.

[host: Address]

FTP: File uploading failed. [host: Address]

FTP: File uploaded successfully. [host: Address]

FTP: Login failed. [host: Address]

FTP: No such remote path. [host: Address]

FTP: Unknown FTP server. [host: Address]

Provide information when the camera uploads a video file to the FTP server.

Address is the IP address of the FTP server.

 

 

Cisco Video Surveillance 2600 IP Camera User Guide

 

 

 

 

 

 

OL-24127-02

 

 

3-45

 

 

 

 

 

Page 66 Page 68
Image 67
Page 66 Page 68
Contents Americas Headquarters Cisco Video Surveillance 2600 IP Camera User GuideCisco Video Surveillance 2600 IP Camera User Guide Organization OverviewPreface Cisco Video Surveillance 2600 IP Camera User Guide Iii N T E N T SUsing the IP Camera with Cisco VSM A-1 Features, IP Camera Overview, FeaturesPhysical Details IP Camera OverviewBack Focus on the IP Camera section on Basic Setup Window section onRear of IP Camera Described in the Resetting the IP Camera section onSide of IP Camera Package Contents DC Auto Iris Lens Connector PinoutsGetting Started Installing the Cisco Video Surveillance IP CameraAction Explanation Action Explanation Performing the Initial Setup of the IP Camera Protocol//ipaddress ProcedureHttps//192.168.0.100 Accessing the IP Camera WindowsHttp//203.70.212.521024 Adjusting Back Focus on the IP CameraHttps//203.70.212.521024 Http//203.70.212.52Initial Setup of the IP Camera Powering the IP Camera On or OffResetting the IP Camera Reset Type Procedure RemarksCleaning the IP Camera OL-24127-02 Configuration Overview Configuring and Managing the IP CameraConfiguration Item Explanation Guidelines for Use Reference See the Privacy Region See the Alarm I/O PortsPreset Positions See the Audio Window sectionSee the Syslog & Log Window Navigating the Configuration WindowsSee the Video Log Window Basic Setup Window Setup WindowsOption Description Device SettingsNetwork Settings Advanced Setup WindowBonjour OptionOption Description QoS IP Filter WindowEAP-TLS Options Eapol WindowEAP-FAST Options Users Window, Maintenance Window, Firmware Window, Administration WindowsUsers Window User List AdministratorMaintenance Window Firmware Window Video Window Audio/Video WindowsVideo Window, Audio Window, Privacy Region Window, Settings Dual Streams MPEG-4 + Mjpeg -Configures MPEG-4 forMPEG-4 Settings Resolution Choose the resolution of the Mjpeg video stream Mjpeg SettingsPAL/50 Hz Video AdjustmentDay/Night Vision OptionsOption Description Audio Window Full Duplex Talk and Listen Privacy Region WindowDuplex Talk and Listen Choose Simplex Talk Only , Half Duplex Talk or Listen , orProduct Process Window Security WindowsInitialization Window Users Window section on Complexity WindowMail & FTP Window Applications WindowsSecondary Smtp Server Described in the Basic Setup Window section onMail Setup Primary Smtp ServerSecondary FTP Motion Detection WindowMail Body Primary FTPEvent Window Trigger Event Event ScheduleNew Schedule Clear buttonAttachment Messages, see the Mail & FTP Window section onSnmp Window Manual Control Settings Alarm I/O Ports WindowAlarm Input Settings Alarm Output SettingsPreset Position Port SettingsPTZ RS-485 Window Zoom Out button Preset Positions WindowPatrol Sequence Zoom In buttonFocus Near button Focus Far buttonSystem Window Information, see the Basic Setup Window section onMore information, see the Basic Setup Window section on Status WindowsAudio/Video Window Audio SettingSyslog & Log Window Network WindowSys Log Server Local LogMessage Explanation Log ListSystem log messages Syslog and Log Information Address FTP log messages Address1 Port1 Address2 Port2 , UserSmtp log messages Video Log WindowDelete All button Delete buttonOL-24127-02 Home Window Overview Viewing Video through the Home Window OverviewHome Window Audio controls Home Window ControlsControl Description Digital zoom controlsFor related information, see the Video Window section on Snapshot controlsSave IP camera controlsInformation, see the PTZ RS-485 Window section on PTZ RS-485 Window section onViewing Video through Third-Party Devices or Software Accessing Dual MPEG-4 Streams Accessing the Primary H.264 StreamAccessing Secondary H.264 Stream Accessing the Primary MPEG-4 StreamAccessing Dual Streams H.264 + Mjpeg Accessing the Mjpeg StreamAccessing Dual Streams MPEG-4 + Mjpeg Troubleshooting Troubleshooting For instructions, see the Video Window section on Using the IP Camera with Cisco VSMOL-24127-02 IN-1 D EIN-2 IN-3 DSCP, for QoS Dual streamingIN-4 HttpsIN-5 SdramIN-6 MjpegIN-7 See PTZIN-8 IN-9 IN-10
Top Page Image Contents