Cisco Systems CIVS-IPC-2600 manual Firmware Window, Option

Page 37

Chapter 3 Configuring and Managing the IP Camera

Administration Windows

Table 3-7 Maintenance Window Options (continued)

Option

Upload

Description

Path and folder where a configuration file is stored. You can click Browse to find this location. After you enter this information, click Upload and follow the on-screen prompts to load the configuration file to the IP camera.

After you upload a configuration file to the IP camera, the IP camera restarts automatically.

If you upload configuration from another IP camera that is active in your network, make sure to configure this IP camera with a name, description, and unique IP address (if not obtained from DHCP). To change these options, see the “Basic Setup Window” section on page 3-5.

Note A configuration file that you upload includes the passwords that are configured for the administrator and for users. If you change any passwords after saving the configuration file, be aware that uploading the file overwrites the new passwords with the saved ones.

Firmware Window

The Firmware window lets you view information about the firmware that is installed on the IP camera and upgrade the firmware.

Before you upgrade firmware, download the firmware file to a PC that is accessible on your network and unzip the file if it is zipped. To download firmware, go to this web page:

http://www.cisco.com/en/US/products/ps7307/index.html

After you upgrade firmware, the IP camera restarts automatically. It retains all configuration information.

To display the Firmware window, access the configuration windows as described in the “Accessing the IP Camera Windows” section on page 2-6, click Administration, then click Firmware.

Table 3-8describes the options in the Firmware window.

Table 3-8 Firmware Window Options

Option

Description

 

 

Firmware Version

Display only. Firmware version that is loaded on the IP camera.

 

 

Upgrade

Click the Upgrade button to upgrade the firmware on the IP camera.

 

When you click this button, the Upgrade Firmware window appears. In this

 

window, enter the path and folder where the firmware upgrade file for the IP

 

camera is stored. The upgrade file may be stored on another PC. You can

 

click Browse to find this location. After you enter this information, click

 

Upgrade and follow the on-screen prompts to load the firmware upgrade on

 

the IP camera.

 

Note Do not power down the IP camera during the upgrade procedure.

 

 

Recovery Firmware

Display only. Firmware version of the recovery image. If an upgrade fails,

Version

the IP camera boots from the recovery image.

 

 

 

 

Cisco Video Surveillance 2600 IP Camera User Guide

 

 

 

 

 

 

OL-24127-02

 

 

3-15

 

 

 

 

 

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Americas Headquarters Cisco Video Surveillance 2600 IP Camera User GuideCisco Video Surveillance 2600 IP Camera User Guide Organization OverviewPreface Cisco Video Surveillance 2600 IP Camera User Guide Iii N T E N T SUsing the IP Camera with Cisco VSM A-1 Features, IP Camera Overview, FeaturesPhysical Details IP Camera OverviewBack Focus on the IP Camera section on Basic Setup Window section onRear of IP Camera Described in the Resetting the IP Camera section onSide of IP Camera Package Contents DC Auto Iris Lens Connector PinoutsGetting Started Installing the Cisco Video Surveillance IP CameraAction Explanation Action Explanation Performing the Initial Setup of the IP Camera Protocol//ipaddress ProcedureHttps//192.168.0.100 Accessing the IP Camera WindowsHttps//203.70.212.521024 Adjusting Back Focus on the IP CameraHttp//203.70.212.52 Http//203.70.212.521024Resetting the IP Camera Powering the IP Camera On or OffReset Type Procedure Remarks Initial Setup of the IP CameraCleaning the IP Camera OL-24127-02 Configuration Overview Configuring and Managing the IP CameraConfiguration Item Explanation Guidelines for Use Reference Preset Positions See the Alarm I/O PortsSee the Audio Window section See the Privacy RegionSee the Syslog & Log Window Navigating the Configuration WindowsSee the Video Log Window Basic Setup Window Setup WindowsOption Description Device SettingsNetwork Settings Advanced Setup WindowBonjour OptionOption Description QoS IP Filter WindowEAP-TLS Options Eapol WindowEAP-FAST Options Users Window, Maintenance Window, Firmware Window, Administration WindowsUsers Window User List AdministratorMaintenance Window Firmware Window Video Window Audio/Video WindowsVideo Window, Audio Window, Privacy Region Window, Settings Dual Streams MPEG-4 + Mjpeg -Configures MPEG-4 forMPEG-4 Settings Resolution Choose the resolution of the Mjpeg video stream Mjpeg SettingsPAL/50 Hz Video AdjustmentDay/Night Vision OptionsOption Description Audio Window Duplex Talk and Listen Privacy Region WindowChoose Simplex Talk Only , Half Duplex Talk or Listen , or Full Duplex Talk and ListenProduct Process Window Security WindowsInitialization Window Users Window section on Complexity WindowMail & FTP Window Applications WindowsMail Setup Described in the Basic Setup Window section onPrimary Smtp Server Secondary Smtp ServerMail Body Motion Detection WindowPrimary FTP Secondary FTPEvent Window New Schedule Event ScheduleClear button Trigger EventAttachment Messages, see the Mail & FTP Window section onSnmp Window Alarm Input Settings Alarm I/O Ports WindowAlarm Output Settings Manual Control SettingsPreset Position Port SettingsPTZ RS-485 Window Patrol Sequence Preset Positions WindowZoom In button Zoom Out buttonFocus Near button Focus Far buttonMore information, see the Basic Setup Window section on Information, see the Basic Setup Window section onStatus Windows System WindowAudio/Video Window Audio SettingSyslog & Log Window Network WindowSys Log Server Local LogMessage Explanation Log ListSystem log messages Syslog and Log Information Address FTP log messages Address1 Port1 Address2 Port2 , UserSmtp log messages Video Log WindowDelete All button Delete buttonOL-24127-02 Home Window Overview Viewing Video through the Home Window OverviewHome Window Control Description Home Window ControlsDigital zoom controls Audio controlsSave Snapshot controlsIP camera controls For related information, see the Video Window section onInformation, see the PTZ RS-485 Window section on PTZ RS-485 Window section onViewing Video through Third-Party Devices or Software Accessing Secondary H.264 Stream Accessing the Primary H.264 StreamAccessing the Primary MPEG-4 Stream Accessing Dual MPEG-4 StreamsAccessing Dual Streams H.264 + Mjpeg Accessing the Mjpeg StreamAccessing Dual Streams MPEG-4 + Mjpeg Troubleshooting Troubleshooting For instructions, see the Video Window section on Using the IP Camera with Cisco VSMOL-24127-02 IN-1 D EIN-2 IN-3 DSCP, for QoS Dual streamingIN-4 HttpsIN-5 SdramIN-6 MjpegIN-7 See PTZIN-8 IN-9 IN-10
Top Page Image Contents