Cisco Systems CIVS-IPC-2600 manual Audio Window, Section on

Page 45

Chapter 3 Configuring and Managing the IP Camera

Audio/Video Windows

Audio Window

The Audio window provides options for enabling and configuring audio that is transmitted to and from the IP camera. You can configure audio for these devices:

Internal microphone—The IP camera includes an internal microphone that can capture audio at the camera location. This audio is sent to the PC that you use to view video from the IP camera. You can listen to the audio when viewing video in the Home window.

External microphone—You can connect an optional external microphone (available from third-parties) to the IP camera. This audio is sent to the PC that you use to view video from the IP camera. You can listen to the audio when viewing video in the Home window. Connecting an external microphone disables the internal microphone.

External speaker— You can connect an optional external speaker (available from third-parties) to the IP camera. This speaker plays audio that is captured by the microphone of the PC that you use to view video from the IP camera. The PC can capture and send this audio only when the Home window is open.

To display the Audio window, access the configuration windows as described in the “Accessing the IP Camera Windows” section on page 2-6, click Audio/Video, then click Audio.

If you change any options in the Audio window, you must click Save to save the changes. To discard the changes, click Cancel before clicking Save. These buttons appear at the bottom of the window. You may need to scroll down to see them.

Table 3-10describes the options in the Audio window.

Table 3-10

Audio Window Options

 

 

 

Option

 

Description

 

 

 

Enable Audio

 

Check this check box to enable audio from the IP camera, and choose one of

 

 

these options:

 

 

Simplex - Listen Only—Enables a simplex connection that allows you

 

 

to receive audio from the IP camera but not transmit audio to the IP

 

 

camera

 

 

Simplex - Talk Only—Enables a simplex connection that allows you to

 

 

transmit audio to the IP camera but not receive audio from the IP camera

 

 

Half Duplex - Talk or Listen—Enables a half duplex connection that

 

 

lets you receive audio from and transmit audio to the IP camera, but not

 

 

simultaneously

 

 

Full Duplex - Talk and Listen—Enables a full duplex connection that

 

 

lets you simultaneously receive audio from and transmit audio to the IP

 

 

camera

 

 

Note When you enable transmitting audio to the IP camera, the internal

 

 

microphone on the IP camera or an external microphone that is

 

 

attached to the IP camera is muted by default. To unmute the

 

 

microphone, use the Microphone On toggle button in the Home

 

 

window. For detailed information, see the “Home Window Controls”

 

 

section on page 4-3.

 

 

 

 

 

Cisco Video Surveillance 2600 IP Camera User Guide

 

 

 

 

 

 

OL-24127-02

 

 

3-23

 

 

 

 

 

Image 45
Contents Americas Headquarters Cisco Video Surveillance 2600 IP Camera User GuideCisco Video Surveillance 2600 IP Camera User Guide Organization OverviewPreface Cisco Video Surveillance 2600 IP Camera User Guide Iii N T E N T SUsing the IP Camera with Cisco VSM A-1 Features, IP Camera Overview, FeaturesPhysical Details IP Camera OverviewBack Focus on the IP Camera section on Basic Setup Window section onRear of IP Camera Described in the Resetting the IP Camera section onSide of IP Camera Package Contents DC Auto Iris Lens Connector PinoutsGetting Started Installing the Cisco Video Surveillance IP CameraAction Explanation Action Explanation Performing the Initial Setup of the IP Camera Protocol//ipaddress ProcedureHttps//192.168.0.100 Accessing the IP Camera WindowsHttps//203.70.212.521024 Adjusting Back Focus on the IP CameraHttp//203.70.212.52 Http//203.70.212.521024Resetting the IP Camera Powering the IP Camera On or OffReset Type Procedure Remarks Initial Setup of the IP CameraCleaning the IP Camera OL-24127-02 Configuration Overview Configuring and Managing the IP CameraConfiguration Item Explanation Guidelines for Use Reference Preset Positions See the Alarm I/O PortsSee the Audio Window section See the Privacy RegionNavigating the Configuration Windows See the Syslog & Log WindowSee the Video Log Window Basic Setup Window Setup WindowsOption Description Device SettingsNetwork Settings Advanced Setup WindowBonjour OptionOption Description QoS IP Filter WindowEapol Window EAP-TLS OptionsEAP-FAST Options Administration Windows Users Window, Maintenance Window, Firmware Window,Users Window User List AdministratorMaintenance Window Firmware Window Audio/Video Windows Video WindowVideo Window, Audio Window, Privacy Region Window, Settings Dual Streams MPEG-4 + Mjpeg -Configures MPEG-4 forMPEG-4 Settings Resolution Choose the resolution of the Mjpeg video stream Mjpeg SettingsPAL/50 Hz Video AdjustmentDay/Night Vision OptionsOption Description Audio Window Duplex Talk and Listen Privacy Region WindowChoose Simplex Talk Only , Half Duplex Talk or Listen , or Full Duplex Talk and ListenSecurity Windows Product Process WindowInitialization Window Users Window section on Complexity WindowMail & FTP Window Applications WindowsMail Setup Described in the Basic Setup Window section onPrimary Smtp Server Secondary Smtp ServerMail Body Motion Detection WindowPrimary FTP Secondary FTPEvent Window New Schedule Event ScheduleClear button Trigger EventAttachment Messages, see the Mail & FTP Window section onSnmp Window Alarm Input Settings Alarm I/O Ports WindowAlarm Output Settings Manual Control SettingsPort Settings Preset PositionPTZ RS-485 Window Patrol Sequence Preset Positions WindowZoom In button Zoom Out buttonFocus Near button Focus Far buttonMore information, see the Basic Setup Window section on Information, see the Basic Setup Window section onStatus Windows System WindowAudio/Video Window Audio SettingSyslog & Log Window Network WindowSys Log Server Local LogLog List Message ExplanationSystem log messages Syslog and Log Information Address FTP log messages Address1 Port1 Address2 Port2 , UserSmtp log messages Video Log WindowDelete All button Delete buttonOL-24127-02 Home Window Overview Viewing Video through the Home Window OverviewHome Window Control Description Home Window ControlsDigital zoom controls Audio controlsSave Snapshot controlsIP camera controls For related information, see the Video Window section onInformation, see the PTZ RS-485 Window section on PTZ RS-485 Window section onViewing Video through Third-Party Devices or Software Accessing Secondary H.264 Stream Accessing the Primary H.264 StreamAccessing the Primary MPEG-4 Stream Accessing Dual MPEG-4 StreamsAccessing the Mjpeg Stream Accessing Dual Streams H.264 + MjpegAccessing Dual Streams MPEG-4 + Mjpeg Troubleshooting Troubleshooting For instructions, see the Video Window section on Using the IP Camera with Cisco VSMOL-24127-02 IN-1 D EIN-2 IN-3 DSCP, for QoS Dual streamingIN-4 HttpsIN-5 SdramIN-6 MjpegIN-7 See PTZIN-8 IN-9 IN-10