Cisco Systems CIVS-IPC-2600 manual PTZ RS-485 Window section on

Page 75

Chapter 4 Viewing Live Video

Viewing Video through the Home Window Overview

Table 4-1

Home Window Controls (continued)

 

 

 

Control

 

Description

 

 

 

Preset Camera

 

When you choose a preset position from this list, the camera immediately goes to

View drop-down

that preset position.

list

 

If the camera is executing a patrol sequence, choosing a preset position from this

 

 

 

 

list cancels the sequence.

 

 

This button appears only if you enabled external PTZ for the camera. For

 

 

information about enabling external PTZ and configuring preset positions, see the

 

 

“PTZ (RS-485) Window” section on page 3-35.

 

 

Patrol Sequence

Click this button to execute the sequence that is configured for this IP camera.

button

 

For information about configuring a sequence, see the “PTZ (RS-485) Window”

 

 

 

 

section on page 3-35.

 

 

Zoom Out button

Use these buttons to control optical zooming.

 

 

The optical zoom function requires that the IP camera be installed with a

 

 

motorized zoom/focus lens in a pan/tilt mount that supports the Pelco D protocol

 

 

and that PTZ functions are enabled. For more information, see the “PTZ (RS-485)

Zoom In button

 

 

Window” section on page 3-35.

IP camera control

To pan the IP camera, use the left or right arrow buttons.

buttons

To tilt the IP camera, use the up or down arrow buttons.

 

 

To move the IP camera to its home position, click the Move to Home button, which

 

is located in the middle of the group of arrow keys.

 

Pan and tilt functions require that the IP camera be installed with a pan/tilt mount

 

that supports the Pelco D protocol and that PTZ functions are enabled. For more

 

information, see the “PTZ (RS-485) Window” section on page 3-35.

 

For information about configuring the home position, see the “Preset Positions

 

Window” section on page 3-36.

 

 

Focus far button

Use these buttons to adjust the focus of the IP camera.

 

The focus function requires that the IP camera be installed with a motorized

 

zoom/focus lens in a pan/tilt mount that supports the Pelco D protocol and that

 

PTZ functions are enabled. For more information, see the “PTZ (RS-485)

Focus Near button

Window” section on page 3-35.

Day button

Improves video quality when the IP camera captures video in bright conditions.

 

This button appears only if you configure the Day/Night Vision Switch Mode to

 

Day or Night. For more information, see the “Video Window” section on

 

page 3-16.

Cisco Video Surveillance 2600 IP Camera User Guide

 

OL-24127-02

4-5

 

 

 

Page 74 Page 76
Image 75
Page 74 Page 76
Contents Americas Headquarters Cisco Video Surveillance 2600 IP Camera User GuideCisco Video Surveillance 2600 IP Camera User Guide Organization OverviewPreface Cisco Video Surveillance 2600 IP Camera User Guide Iii N T E N T SUsing the IP Camera with Cisco VSM A-1 Features, IP Camera Overview, FeaturesPhysical Details IP Camera OverviewBack Focus on the IP Camera section on Basic Setup Window section onRear of IP Camera Described in the Resetting the IP Camera section onSide of IP Camera Package Contents DC Auto Iris Lens Connector PinoutsGetting Started Installing the Cisco Video Surveillance IP CameraAction Explanation Action Explanation Performing the Initial Setup of the IP Camera Protocol//ipaddress ProcedureHttps//192.168.0.100 Accessing the IP Camera WindowsHttp//203.70.212.521024 Adjusting Back Focus on the IP CameraHttps//203.70.212.521024 Http//203.70.212.52Initial Setup of the IP Camera Powering the IP Camera On or OffResetting the IP Camera Reset Type Procedure RemarksCleaning the IP Camera OL-24127-02 Configuration Overview Configuring and Managing the IP CameraConfiguration Item Explanation Guidelines for Use Reference See the Privacy Region See the Alarm I/O PortsPreset Positions See the Audio Window sectionNavigating the Configuration Windows See the Syslog & Log WindowSee the Video Log Window Basic Setup Window Setup WindowsOption Description Device SettingsNetwork Settings Advanced Setup WindowBonjour OptionOption Description QoS IP Filter WindowEapol Window EAP-TLS OptionsEAP-FAST Options Administration Windows Users Window, Maintenance Window, Firmware Window,Users Window User List AdministratorMaintenance Window Firmware Window Audio/Video Windows Video WindowVideo Window, Audio Window, Privacy Region Window, Settings Dual Streams MPEG-4 + Mjpeg -Configures MPEG-4 forMPEG-4 Settings Resolution Choose the resolution of the Mjpeg video stream Mjpeg SettingsPAL/50 Hz Video AdjustmentDay/Night Vision OptionsOption Description Audio Window Full Duplex Talk and Listen Privacy Region WindowDuplex Talk and Listen Choose Simplex Talk Only , Half Duplex Talk or Listen , orSecurity Windows Product Process WindowInitialization Window Users Window section on Complexity WindowMail & FTP Window Applications WindowsSecondary Smtp Server Described in the Basic Setup Window section onMail Setup Primary Smtp ServerSecondary FTP Motion Detection WindowMail Body Primary FTPEvent Window Trigger Event Event ScheduleNew Schedule Clear buttonAttachment Messages, see the Mail & FTP Window section onSnmp Window Manual Control Settings Alarm I/O Ports WindowAlarm Input Settings Alarm Output SettingsPort Settings Preset PositionPTZ RS-485 Window Zoom Out button Preset Positions WindowPatrol Sequence Zoom In buttonFocus Near button Focus Far buttonSystem Window Information, see the Basic Setup Window section onMore information, see the Basic Setup Window section on Status WindowsAudio/Video Window Audio SettingSyslog & Log Window Network WindowSys Log Server Local LogLog List Message ExplanationSystem log messages Syslog and Log Information Address FTP log messages Address1 Port1 Address2 Port2 , UserSmtp log messages Video Log WindowDelete All button Delete buttonOL-24127-02 Home Window Overview Viewing Video through the Home Window OverviewHome Window Audio controls Home Window ControlsControl Description Digital zoom controlsFor related information, see the Video Window section on Snapshot controlsSave IP camera controlsInformation, see the PTZ RS-485 Window section on PTZ RS-485 Window section onViewing Video through Third-Party Devices or Software Accessing Dual MPEG-4 Streams Accessing the Primary H.264 StreamAccessing Secondary H.264 Stream Accessing the Primary MPEG-4 StreamAccessing the Mjpeg Stream Accessing Dual Streams H.264 + MjpegAccessing Dual Streams MPEG-4 + Mjpeg Troubleshooting Troubleshooting For instructions, see the Video Window section on Using the IP Camera with Cisco VSMOL-24127-02 IN-1 D EIN-2 IN-3 DSCP, for QoS Dual streamingIN-4 HttpsIN-5 SdramIN-6 MjpegIN-7 See PTZIN-8 IN-9 IN-10
Top Page Image Contents