Cisco Systems CIVS-IPC-2600 manual Maintenance Window, Section on

Page 36

Chapter 3 Configuring and Managing the IP Camera

Administration Windows

Maintenance Window

The Maintenance window provides options for resetting or restarting the IP camera, saving configuration information from the IP camera, and uploading the configuration information to the IP camera.

Saving and uploading configuration is useful for these activities:

•Configuring multiple IP cameras—If your network includes several IP cameras that should have similar configurations, you can configure one IP camera, save that configuration, and upload it to other IP cameras. Then, instead of manually configuring all options on each IP camera, you manually configure only the options that are unique, such as the IP address, if not obtained from DHCP.

•Backing up configuration—If you save the configuration from the IP camera, you can upload it to the IP camera to restore the configuration if it is lost, or if you can upload it to a replacement IP camera, if needed.

To display the Maintenance window, access the configuration windows as described in the “Accessing the IP Camera Windows” section on page 2-6, click Administration, then click Maintenance.

Table 3-7describes the options in the Maintenance window.

Table 3-7 Maintenance Window Options

Option

Description

 

 

Restore Factory

Click the Restore button to restore all IP camera settings to their factory

Defaults

default values.

 

To confirm the restore procedure, click OK in the confirmation pop-up

 

window. Otherwise, click Cancel.

 

This action has the same effect as pressing and holding the Reset button on

 

the IP camera for at least 10 seconds. After you perform this procedure,

 

follow the steps in the “Performing the Initial Setup of the IP Camera”

 

section on page 2-4.

 

 

Restart

Click the Restart button to reboot the software on IP camera.

 

To confirm the restart procedure, click OK in the confirmation pop-up

 

window. Otherwise, click Cancel.

 

This action has the same effect as pressing and immediately releasing the

 

Reset button on the IP camera, or powering the IP camera down and then

 

powering it up.

 

 

Configuration

Click the Save button to save the current IP camera configuration

 

information to a binary file.

 

When you click this button, the File Download window appears. Use this

 

window to save the configuration file. This file must include the

 

extension .cfg.

 

You can then upload this configuration information to any IP camera in the

 

network. This feature is useful for creating a backup of this configuration

 

and for configuring other IP cameras based on this configuration.

 

 

 

Cisco Video Surveillance 2600 IP Camera User Guide

3-14

OL-24127-02

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Cisco Video Surveillance 2600 IP Camera User Guide Americas HeadquartersCisco Video Surveillance 2600 IP Camera User Guide Overview OrganizationPreface Cisco Video Surveillance 2600 IP Camera User Guide N T E N T S IiiUsing the IP Camera with Cisco VSM A-1 Features Features, IP Camera Overview,IP Camera Overview Physical DetailsBasic Setup Window section on Back Focus on the IP Camera section onDescribed in the Resetting the IP Camera section on Rear of IP CameraSide of IP Camera DC Auto Iris Lens Connector Pinouts Package ContentsInstalling the Cisco Video Surveillance IP Camera Getting StartedAction Explanation Action Explanation Performing the Initial Setup of the IP Camera Procedure Protocol//ipaddressAccessing the IP Camera Windows Https//192.168.0.100Adjusting Back Focus on the IP Camera Https//203.70.212.521024Http//203.70.212.52 Http//203.70.212.521024Powering the IP Camera On or Off Resetting the IP CameraReset Type Procedure Remarks Initial Setup of the IP CameraCleaning the IP Camera OL-24127-02 Configuring and Managing the IP Camera Configuration OverviewConfiguration Item Explanation Guidelines for Use Reference See the Alarm I/O Ports Preset PositionsSee the Audio Window section See the Privacy RegionNavigating the Configuration Windows See the Syslog & Log WindowSee the Video Log Window Setup Windows Basic Setup WindowDevice Settings Option DescriptionAdvanced Setup Window Network SettingsOption BonjourOption Description IP Filter Window QoSEapol Window EAP-TLS OptionsEAP-FAST Options Administration Windows Users Window, Maintenance Window, Firmware Window,Users Window Administrator User ListMaintenance Window Firmware Window Audio/Video Windows Video WindowVideo Window, Audio Window, Privacy Region Window, Dual Streams MPEG-4 + Mjpeg -Configures MPEG-4 for SettingsMPEG-4 Settings Mjpeg Settings Resolution Choose the resolution of the Mjpeg video streamVideo Adjustment PAL/50 HzOptions Day/Night VisionOption Description Audio Window Privacy Region Window Duplex Talk and ListenChoose Simplex Talk Only , Half Duplex Talk or Listen , or Full Duplex Talk and ListenSecurity Windows Product Process WindowInitialization Window Complexity Window Users Window section onApplications Windows Mail & FTP WindowDescribed in the Basic Setup Window section on Mail SetupPrimary Smtp Server Secondary Smtp ServerMotion Detection Window Mail BodyPrimary FTP Secondary FTPEvent Window Event Schedule New ScheduleClear button Trigger EventMessages, see the Mail & FTP Window section on AttachmentSnmp Window Alarm I/O Ports Window Alarm Input SettingsAlarm Output Settings Manual Control SettingsPort Settings Preset PositionPTZ RS-485 Window Preset Positions Window Patrol SequenceZoom In button Zoom Out buttonFocus Far button Focus Near buttonInformation, see the Basic Setup Window section on More information, see the Basic Setup Window section onStatus Windows System WindowAudio Setting Audio/Video WindowNetwork Window Syslog & Log WindowLocal Log Sys Log ServerLog List Message ExplanationSystem log messages Syslog and Log Information Address Address1 Port1 Address2 Port2 , User FTP log messagesVideo Log Window Smtp log messagesDelete button Delete All buttonOL-24127-02 Viewing Video through the Home Window Overview Home Window OverviewHome Window Home Window Controls Control DescriptionDigital zoom controls Audio controlsSnapshot controls SaveIP camera controls For related information, see the Video Window section onPTZ RS-485 Window section on Information, see the PTZ RS-485 Window section onViewing Video through Third-Party Devices or Software Accessing the Primary H.264 Stream Accessing Secondary H.264 StreamAccessing the Primary MPEG-4 Stream Accessing Dual MPEG-4 StreamsAccessing the Mjpeg Stream Accessing Dual Streams H.264 + MjpegAccessing Dual Streams MPEG-4 + Mjpeg Troubleshooting Troubleshooting Using the IP Camera with Cisco VSM For instructions, see the Video Window section onOL-24127-02 D E IN-1IN-2 DSCP, for QoS Dual streaming IN-3Https IN-4Sdram IN-5Mjpeg IN-6See PTZ IN-7IN-8 IN-9 IN-10
Top Page Image Contents