Cisco Systems CIVS-IPC-2600 manual Dual Streams MPEG-4 + Mjpeg -Configures MPEG-4 for, Settings

Page 39

Chapter 3 Configuring and Managing the IP Camera

Audio/Video Windows

Table 3-9

Video Window Options

 

 

 

Option

 

Description

 

 

Streaming Mode

Choose the mode that the IP camera uses for video streaming:

 

 

• Single H.264 Stream—Configures H.264 for the primary stream. The

 

 

stream can be up to D1 resolution and 30 fps.

 

 

• Single MPEG-4Stream—Configures MPEG-4 for the primary stream.

 

 

The stream can be up to D1 resolution and 30 fps for NTSC or 25 fps for

 

 

PAL.

 

 

• Single MJPEG Stream—Configures MJPEG for the primary stream.

 

 

The stream can be up to D1 resolution and 30 fps.

 

 

• Dual H.264 Streams—Configures H.264 for the primary stream and the

 

 

secondary stream. The primary stream can be up to 4 CIF and 30 fps for

 

 

NTSC or 25 fps for PAL. The secondary stream can be up to CIF and 15

 

 

fps.

 

 

• Dual MPEG-4Streams—Configures MPEG-4 for the primary stream

 

 

and the secondary stream. The primary stream can be up to 4 CIF and 30

 

 

fps for NTSC or 25 fps for PAL. The secondary stream can be up to CIF

 

 

and 15 fps.

 

 

• Dual Streams (H.264 + MJPEG)—Configures H.264 for the primary

 

 

stream and MJPEG for the secondary stream. The primary stream can be

 

 

up to 4CIF and 30 fps for NTSC or 25 fps for PAL. The secondary stream

 

 

can be up to CIF and 15 fps.

 

 

• Dual Streams (MPEG-4 + MJPEG)—ConfiguresMPEG-4 for the

 

 

primary stream and MJPEG for the secondary stream. The primary

 

 

stream can be up to 4CIF and 30 fps for NTSC or 25 fps for PAL. The

 

 

secondary stream can be up to CIF and 15 fps.

 

 

H.264 Settings 1

 

Note These H.264 Settings options appear if you choose Single H.264 Stream, Dual H.264 Streams, or Dual Streams (H.264 + MJPEG) from the Streaming Mode drop-down list.

 

 

Resolution

Choose the desired video resolution format for the primary video stream

 

 

 

from the IP camera.

 

 

 

The default resolution is 720 x 480 for NTSC or 720 x 576 for PAL.

 

 

 

 

 

 

Video Quality Control

Choose an option for the video quality of the primary video stream from the

 

 

 

IP camera:

 

 

 

• Constant Bit Rate—Specifies that the video stream is output at or close

 

 

 

to the constant bit rate that you choose. The default value is 4 Mbps. A

 

 

 

higher bit rate provides better video quality but consumes more

 

 

 

bandwidth.

 

 

 

• Fixed Quality—Specifies that video is output at a fixed quality, which

 

 

 

ranges from Very High to Very Low. The bit rate may vary to maintain

 

 

 

this quality. The default fixed quality is Normal. A higher fixed quality

 

 

 

provides better video quality but consumes more bandwidth.

 

 

 

You can use these options to help manage bandwidth use in your network.

 

 

 

For example, if the IP camera is focused on an area with little movement,

 

 

 

such as an emergency exit, you can configure it with a low fixed quality.

 

 

 

 

 

 

 

 

 

Cisco Video Surveillance 2600 IP Camera User Guide

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OL-24127-02

 

 

3-17

 

 

 

 

 

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Americas Headquarters Cisco Video Surveillance 2600 IP Camera User GuideCisco Video Surveillance 2600 IP Camera User Guide Organization OverviewPreface Cisco Video Surveillance 2600 IP Camera User Guide Iii N T E N T SUsing the IP Camera with Cisco VSM A-1 Features, IP Camera Overview, FeaturesPhysical Details IP Camera OverviewBack Focus on the IP Camera section on Basic Setup Window section onRear of IP Camera Described in the Resetting the IP Camera section onSide of IP Camera Package Contents DC Auto Iris Lens Connector PinoutsGetting Started Installing the Cisco Video Surveillance IP CameraAction Explanation Action Explanation Performing the Initial Setup of the IP Camera Protocol//ipaddress ProcedureHttps//192.168.0.100 Accessing the IP Camera WindowsHttp//203.70.212.521024 Adjusting Back Focus on the IP CameraHttps//203.70.212.521024 Http//203.70.212.52Initial Setup of the IP Camera Powering the IP Camera On or OffResetting the IP Camera Reset Type Procedure RemarksCleaning the IP Camera OL-24127-02 Configuration Overview Configuring and Managing the IP CameraConfiguration Item Explanation Guidelines for Use Reference See the Privacy Region See the Alarm I/O PortsPreset Positions See the Audio Window sectionNavigating the Configuration Windows See the Syslog & Log WindowSee the Video Log Window Basic Setup Window Setup WindowsOption Description Device SettingsNetwork Settings Advanced Setup WindowBonjour OptionOption Description QoS IP Filter WindowEapol Window EAP-TLS OptionsEAP-FAST Options Administration Windows Users Window, Maintenance Window, Firmware Window,Users Window User List AdministratorMaintenance Window Firmware Window Audio/Video Windows Video WindowVideo Window, Audio Window, Privacy Region Window, Settings Dual Streams MPEG-4 + Mjpeg -Configures MPEG-4 forMPEG-4 Settings Resolution Choose the resolution of the Mjpeg video stream Mjpeg SettingsPAL/50 Hz Video AdjustmentDay/Night Vision OptionsOption Description Audio Window Full Duplex Talk and Listen Privacy Region WindowDuplex Talk and Listen Choose Simplex Talk Only , Half Duplex Talk or Listen , orSecurity Windows Product Process WindowInitialization Window Users Window section on Complexity WindowMail & FTP Window Applications WindowsSecondary Smtp Server Described in the Basic Setup Window section onMail Setup Primary Smtp ServerSecondary FTP Motion Detection WindowMail Body Primary FTPEvent Window Trigger Event Event ScheduleNew Schedule Clear buttonAttachment Messages, see the Mail & FTP Window section onSnmp Window Manual Control Settings Alarm I/O Ports WindowAlarm Input Settings Alarm Output SettingsPort Settings Preset PositionPTZ RS-485 Window Zoom Out button Preset Positions WindowPatrol Sequence Zoom In buttonFocus Near button Focus Far buttonSystem Window Information, see the Basic Setup Window section onMore information, see the Basic Setup Window section on Status WindowsAudio/Video Window Audio SettingSyslog & Log Window Network WindowSys Log Server Local LogLog List Message ExplanationSystem log messages Syslog and Log Information Address FTP log messages Address1 Port1 Address2 Port2 , UserSmtp log messages Video Log WindowDelete All button Delete buttonOL-24127-02 Home Window Overview Viewing Video through the Home Window OverviewHome Window Audio controls Home Window ControlsControl Description Digital zoom controlsFor related information, see the Video Window section on Snapshot controlsSave IP camera controlsInformation, see the PTZ RS-485 Window section on PTZ RS-485 Window section onViewing Video through Third-Party Devices or Software Accessing Dual MPEG-4 Streams Accessing the Primary H.264 StreamAccessing Secondary H.264 Stream Accessing the Primary MPEG-4 StreamAccessing the Mjpeg Stream Accessing Dual Streams H.264 + MjpegAccessing Dual Streams MPEG-4 + Mjpeg Troubleshooting Troubleshooting For instructions, see the Video Window section on Using the IP Camera with Cisco VSMOL-24127-02 IN-1 D EIN-2 IN-3 DSCP, for QoS Dual streamingIN-4 HttpsIN-5 SdramIN-6 MjpegIN-7 See PTZIN-8 IN-9 IN-10
Top Page Image Contents