Cisco Systems CIVS-IPC-2621V manual Syslog and Log Information

Page 83

Chapter 3 Configuring and Managing the IP Camera

Status Windows

Table 3-24

Syslog and Log Information (continued)

 

 

 

Message

 

Explanation

 

 

Audio: Disable microphone.

Captures information when audio devices are

 

 

enabled or disabled in the Audio window.

Audio: Disable speaker.

 

 

 

Audio: Enable microphone. (audio type: G.711

 

A-Law)

 

 

 

 

Audio: Enable microphone. (audio type: G.711

 

u-Law)

 

 

 

 

Audio: Enable microphone. (audio type: G.726)

 

 

 

Audio: Enable speaker.

 

 

 

DHCP: Lease release successfully.

Provides information about DHCP activities in

 

 

networks that include DHCP.

DHCP: Lease release unsuccessfully.

 

 

 

DHCP: Lease renewal successfully.

 

 

 

DHCP: Lease renewal unsuccessfully.

 

 

 

DHCP: Timeout error when renewing DHCP

 

lease.

 

 

 

 

DST: Adjust DST Number hour automatically.

The IP camera has automatically adjusted its clock

 

 

by the indicated number of hours for the beginning

 

 

or end of daylight saving time.

 

 

DST: DST begin.

The IP camera has adjusted its clock for the

 

 

beginning of daylight saving time.

 

 

 

DST: DST end.

 

The IP camera has adjusted its clock for the end of

 

 

daylight saving time.

 

 

LOG: Clear all messages.

You have used the Clear Log button to delete the

 

 

log file from the IP camera SDRAM.

 

 

LOG: Log file is full. Start to wrap around.

The IP camera SDRAM is full and existing log

 

 

information is beginning to be overwritten.

 

 

Network: Failed to get the IP address. Camera set

IP camera is unable to obtain an IP address

to default IP address.

through DHCP and is set to the default IP address

 

 

of 192.168.0.100.

 

 

Network: LAN activated.

IP camera obtained a network IP address.

 

 

Network: Link down.

IP camera lost connection to the network.

 

 

Network: Link up.

IP camera established connection to the network.

 

 

NTP: Failed to synchronize data & time with the

Provides information when you configure the IP

NTP server.

 

camera to obtains its time from an NTP server.

 

 

NTP: No NTP server specified.

 

 

 

NTP: Synchronization OK.

 

 

 

NTP: The NTP server cannot be reached.

 

 

 

 

 

 

Cisco Video Surveillance System 2621 IP Dome User Guide

 

 

 

 

 

 

OL-24129-02

 

 

3-41

 

 

 

 

 

Image 83
Contents Americas Headquarters Cisco Video Surveillance 2621 IP Dome User GuideCisco Video Surveillance System 2621 IP Dome User Guide N T E N T S Using the IP Camera with Cisco VSM Organization OverviewViii Features, IP Camera Overview, FeaturesIP Camera Overview Physical Details, Package Contents,Top of the 2621 IP Dome Physical DetailsOverview IP Camera Overview Bottom of the 2621 IP Dome Described in the Resetting the IP Camera section onPackage Contents Before You Begin Getting StartedPreventing Electrostatic Discharge Damage Installing the Cisco Video Surveillance 2621 IP DomePreparing for Installation, Mounting with a Junction Box, Passing the Audio Cable through a Ferrite Core Preparing for InstallationMounting with a Junction Box ProcedureDisassembling the 2621 IP Dome Components Attaching the Base Plate to a Junction Box Attaching the Camera Unit to the Base Plate Cisco Video Surveillance System 2621 IP Dome User Guide Attaching the Privacy Shield and Dome Mounting with a Conduit BaseBase plate Camera unit Camera unit screws Attaching the Conduit Base to a Surface Attaching the Base Plate to the Conduit Base See -1 on Cisco Video Surveillance System 2621 IP Dome User Guide 10 Attaching the Privacy Shield and Dome Mounting to a Ceiling Tile 11 Disassembling the 2621 IP Dome Components 12 Preparing the 2621 IP Dome Ceiling Tile See -1 on 13 Securing Torx Screws Mounting on a Solid Surface14 Disassembling the 2621 IP Dome Components See -1 on 15 Securing Torx Screws Performing the Initial Setup of the IP CameraProtocol//ipaddress Http//203.70.212.52 Accessing the IP Camera WindowsHttps//192.168.0.100 Https//203.70.212.521024Http//203.70.212.521024 Adjusting the Video Image16 Adjusting the Camera Lens on the 2621 IP Dome Initial Setup of the IP Camera Powering the IP Camera On or OffResetting the IP Camera Reset Type Procedure RemarksCleaning the IP Camera OL-24129-02 Configuration Overview Configuring and Managing the IP CameraConfiguration Item Explanation Guidelines for Use Reference See the Focus/Zoom Window See the Alarm I/O PortsSee the Audio Window section See the Privacy RegionSnmp Navigating the Configuration WindowsOption Description Setup WindowsBasic Setup Window Device SettingsOption Description Network Settings Advanced Setup WindowBonjour OptionOption Description QoS IP Filter WindowEAP-FAST Options Eapol WindowEAP-TLS Options Users Window Administration WindowsUsers Window, Maintenance Window, Firmware Window, User List AdministratorMaintenance Window Firmware Window Video Window Audio/Video WindowsSettings Dual Streams MPEG-4 + Mjpeg -Configures MPEG-4 forMPEG-4 Settings Resolution Choose the resolution of the Mjpeg video stream Mjpeg SettingsPAL/50 Hz Video AdjustmentDay/Night Vision OptionsOption Description Duplex Talk and Listen Audio WindowControls section on Full Duplex Talk and Listen Privacy Region WindowFocus/Zoom Window Choose Simplex Talk Only , Half Duplex Talk or Listen , orInitialization Window, Complexity Window, Security WindowsInitialization Window Users Window section on Complexity WindowMail/FTP/HTTP Window Applications WindowsSecondary Smtp Server Described in the Basic Setup Window section onMail Setup Primary Smtp ServerHttp Notification Mail BodyPrimary FTP Secondary FTPSystem-provided-name-value-pairs is the event information Motion Detection WindowEvent Window Trigger Event Event ScheduleNew Schedule Clear buttonAttachment Mail/FTP/HTTP Window section onSnmp Window Manual Control Settings Alarm I/O Ports WindowAlarm Input Settings Alarm Output SettingsSystem Status Status WindowsSystem Window Audio/Video Window Audio SettingSyslog & Log Window Network WindowSys Log Server Local LogSystem log messages Log ListMessage Explanation Syslog and Log Information Address FTP log messages Address1 Port1 Address2 Port2 , UserSmtp log messages Video Log WindowDelete All button Delete buttonOL-24129-02 Home Window Overview Viewing Video through the Home Window OverviewHome Window Audio controls Home Window ControlsControl Description Digital zoom controlsFor related information, see the Video Window section on Snapshot controlsSave IP camera controlsViewing Video through Third-Party Devices or Software Accessing the Primary H.264 StreamAccessing Secondary H.264 Stream Accessing Dual Streams H.264 + Mjpeg Accessing the Primary MPEG-4 StreamAccessing Dual MPEG-4 Streams Accessing the Mjpeg StreamAccessing Dual Streams MPEG-4 + Mjpeg OL-24129-02 Troubleshooting Troubleshooting For instructions, see the Video Window section on Using the IP Camera with Cisco VSMOL-24129-02 D E IN-2 IN-3 IN-4 IN-5 IN-6 IN-7 IN-8
Related manuals
Manual 108 pages 61.32 Kb