Cisco Systems CIVS-IPC-2621V manual Dual Streams MPEG-4 + Mjpeg -Configures MPEG-4 for, Settings

Page 59

Chapter 3 Configuring and Managing the IP Camera

Audio/Video Windows

Table 3-9

Video Window Options

 

 

 

Option

 

Description

 

 

Streaming Mode

Choose the mode that the IP camera uses for video streaming:

 

 

• Single H.264 Stream—Configures H.264 for the primary stream. The

 

 

stream can be up to D1 resolution and 30 fps.

 

 

• Single MPEG-4Stream—Configures MPEG-4 for the primary stream.

 

 

The stream can be up to D1 resolution and 30 fps for NTSC or 25 fps for

 

 

PAL.

 

 

• Single MJPEG Stream—Configures MJPEG for the primary stream.

 

 

The stream can be up to D1 resolution and 30 fps.

 

 

• Dual H.264 Streams—Configures H.264 for the primary stream and the

 

 

secondary stream. The primary stream can be up to 4 CIF and 30 fps for

 

 

NTSC or 25 fps for PAL. The secondary stream can be up to CIF and 15

 

 

fps.

 

 

• Dual MPEG-4Streams—Configures MPEG-4 for the primary stream

 

 

and the secondary stream. The primary stream can be up to 4 CIF and 30

 

 

fps for NTSC or 25 fps for PAL. The secondary stream can be up to CIF

 

 

and 15 fps.

 

 

• Dual Streams (H.264 + MJPEG)—Configures H.264 for the primary

 

 

stream and MJPEG for the secondary stream. The primary stream can be

 

 

up to 4CIF and 30 fps for NTSC or 25 fps for PAL. The secondary stream

 

 

can be up to CIF and 15 fps.

 

 

• Dual Streams (MPEG-4 + MJPEG)—ConfiguresMPEG-4 for the

 

 

primary stream and MJPEG for the secondary stream. The primary

 

 

stream can be up to 4CIF and 30 fps for NTSC or 25 fps for PAL. The

 

 

secondary stream can be up to CIF and 15 fps.

 

 

H.264 Settings 1

 

Note These H.264 Settings options appear if you choose Single H.264 Stream, Dual H.264 Streams, or Dual Streams (H.264 + MJPEG) from the Streaming Mode drop-down list.

 

 

Resolution

Choose the desired video resolution format for the primary video stream

 

 

 

from the IP camera.

 

 

 

The default resolution is 720 x 480 for NTSC or 720 x 576 for PAL.

 

 

 

 

 

 

Video Quality Control

Choose an option for the video quality of the primary video stream from the

 

 

 

IP camera:

 

 

 

• Constant Bit Rate—Specifies that the video stream is output at or close

 

 

 

to the constant bit rate that you choose. The default value is 4 Mbps. A

 

 

 

higher bit rate provides better video quality but consumes more

 

 

 

bandwidth.

 

 

 

• Fixed Quality—Specifies that video is output at a fixed quality, which

 

 

 

ranges from Very High to Very Low. The bit rate may vary to maintain

 

 

 

this quality. The default fixed quality is Normal. A higher fixed quality

 

 

 

provides better video quality but consumes more bandwidth.

 

 

 

You can use these options to help manage bandwidth use in your network.

 

 

 

For example, if the IP camera is focused on an area with little movement,

 

 

 

such as an emergency exit, you can configure it with a low fixed quality.

 

 

 

 

 

 

 

 

 

Cisco Video Surveillance System 2621 IP Dome User Guide

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OL-24129-02

 

 

3-17

 

 

 

 

 

Page 58 Page 60
Image 59
Page 58 Page 60
Contents Americas Headquarters Cisco Video Surveillance 2621 IP Dome User GuideCisco Video Surveillance System 2621 IP Dome User Guide N T E N T S Using the IP Camera with Cisco VSM Organization OverviewViii Features, IP Camera Overview, FeaturesIP Camera Overview Physical Details, Package Contents,Top of the 2621 IP Dome Physical DetailsOverview IP Camera Overview Bottom of the 2621 IP Dome Described in the Resetting the IP Camera section onPackage Contents Before You Begin Getting StartedPreventing Electrostatic Discharge Damage Installing the Cisco Video Surveillance 2621 IP DomePreparing for Installation, Mounting with a Junction Box, Passing the Audio Cable through a Ferrite Core Preparing for InstallationMounting with a Junction Box ProcedureDisassembling the 2621 IP Dome Components Attaching the Base Plate to a Junction Box Attaching the Camera Unit to the Base Plate Cisco Video Surveillance System 2621 IP Dome User Guide Attaching the Privacy Shield and Dome Mounting with a Conduit BaseBase plate Camera unit Camera unit screws Attaching the Conduit Base to a Surface Attaching the Base Plate to the Conduit Base See -1 on Cisco Video Surveillance System 2621 IP Dome User Guide 10 Attaching the Privacy Shield and Dome Mounting to a Ceiling Tile 11 Disassembling the 2621 IP Dome Components 12 Preparing the 2621 IP Dome Ceiling Tile See -1 on 13 Securing Torx Screws Mounting on a Solid Surface14 Disassembling the 2621 IP Dome Components See -1 on 15 Securing Torx Screws Performing the Initial Setup of the IP CameraProtocol//ipaddress Http//203.70.212.52 Accessing the IP Camera WindowsHttps//192.168.0.100 Https//203.70.212.521024Http//203.70.212.521024 Adjusting the Video Image16 Adjusting the Camera Lens on the 2621 IP Dome Initial Setup of the IP Camera Powering the IP Camera On or OffResetting the IP Camera Reset Type Procedure RemarksCleaning the IP Camera OL-24129-02 Configuration Overview Configuring and Managing the IP CameraConfiguration Item Explanation Guidelines for Use Reference See the Focus/Zoom Window See the Alarm I/O PortsSee the Audio Window section See the Privacy RegionSnmp Navigating the Configuration WindowsOption Description Setup WindowsBasic Setup Window Device SettingsOption Description Network Settings Advanced Setup WindowBonjour OptionOption Description QoS IP Filter WindowEAP-FAST Options Eapol WindowEAP-TLS Options Users Window Administration WindowsUsers Window, Maintenance Window, Firmware Window, User List AdministratorMaintenance Window Firmware Window Video Window Audio/Video WindowsSettings Dual Streams MPEG-4 + Mjpeg -Configures MPEG-4 forMPEG-4 Settings Resolution Choose the resolution of the Mjpeg video stream Mjpeg SettingsPAL/50 Hz Video AdjustmentDay/Night Vision OptionsOption Description Duplex Talk and Listen Audio WindowControls section on Full Duplex Talk and Listen Privacy Region WindowFocus/Zoom Window Choose Simplex Talk Only , Half Duplex Talk or Listen , orInitialization Window, Complexity Window, Security WindowsInitialization Window Users Window section on Complexity WindowMail/FTP/HTTP Window Applications WindowsSecondary Smtp Server Described in the Basic Setup Window section onMail Setup Primary Smtp ServerHttp Notification Mail BodyPrimary FTP Secondary FTPSystem-provided-name-value-pairs is the event information Motion Detection WindowEvent Window Trigger Event Event ScheduleNew Schedule Clear buttonAttachment Mail/FTP/HTTP Window section onSnmp Window Manual Control Settings Alarm I/O Ports WindowAlarm Input Settings Alarm Output SettingsSystem Status Status WindowsSystem Window Audio/Video Window Audio SettingSyslog & Log Window Network WindowSys Log Server Local LogSystem log messages Log ListMessage Explanation Syslog and Log Information Address FTP log messages Address1 Port1 Address2 Port2 , UserSmtp log messages Video Log WindowDelete All button Delete buttonOL-24129-02 Home Window Overview Viewing Video through the Home Window OverviewHome Window Audio controls Home Window ControlsControl Description Digital zoom controlsFor related information, see the Video Window section on Snapshot controlsSave IP camera controlsViewing Video through Third-Party Devices or Software Accessing the Primary H.264 StreamAccessing Secondary H.264 Stream Accessing Dual Streams H.264 + Mjpeg Accessing the Primary MPEG-4 StreamAccessing Dual MPEG-4 Streams Accessing the Mjpeg StreamAccessing Dual Streams MPEG-4 + Mjpeg OL-24129-02 Troubleshooting Troubleshooting For instructions, see the Video Window section on Using the IP Camera with Cisco VSMOL-24129-02 D E IN-2 IN-3 IN-4 IN-5 IN-6 IN-7 IN-8
Related manuals
Manual 108 pages 61.32 Kb
Top Page Image Contents