Cisco Systems CIVS-IPC-2621V manual Address

Chapter 3 Configuring and Managing the IP Camera

Status Windows

Table 3-24	Syslog and Log Information (continued)
Message		Explanation
output: Failed to set output port Port_Number.		Provides information when you configure the
		output ports on the IP camera.
output: Set output port Port_Number to high OK.
output: Set output port Port_Number to low OK.
output: Set output port Port_Number to pulse OK.
PTZ: Focus far.		A user clicked the Focus Far button in the Home
		window.
PTZ: Focus near.		A user clicked the Focus Near button in the Home
		window.
PTZ: Go to home.		A user clicked the Move Camera Home button in
		the Home window.
PTZ: Go to Preset Position_Number.		Provides information when you pan or tilt the IP
		camera or it move it to a preset position.
PTZ: Move down.
PTZ: Move left.
PTZ: Move right.
PTZ: Move up.
PTZ: Zoom in.
PTZ: Zoom out.
Sensor: Change from Day mode to Night mode.		The IP camera switched from day mode to night
		mode.
Sensor: Change from Night mode to Day mode.		The IP camera switched from night mode to day
		mode.
SSH: Invalid SSH login attempt. [ip: Address]		A user attempted to log in to the IP camera through
		SSH. Address is the IP address of the system that
		was used.
SSH: SSH user logged in. [ip: Address]		A user logged in to the IP camera through SSH.
		Address is the IP address of the system that was
		used.
SSH: SSH user logged out. [ip: Address]		A user logged out of the IP camera through SSH.
		Address is the IP address of the system that was
		used.
Stream: HTTP stream started. [id: User, ip:		Provides information when a user accesses (HTTP
Address]		stream started) or exits (HTTP stream stopped) the
		Home window.
Stream: HTTP stream stopped. [id: User, ip:
Address]		User is the IP camera user name of the user.
		Address is the IP address of the PC that was used.

	Cisco Video Surveillance System 2621 IP Dome User Guide
3-42	OL-24129-02