Cisco Systems CIVS-IPC-2621V manual Option Description

Page 48

Chapter 3 Configuring and Managing the IP Camera

Setup Windows

Table 3-2

Basic Setup Window Options (continued)

 

 

 

Option

 

Description

 

 

 

Description

 

Enter a description of the IP camera. For example, enter the IP camera

 

 

location, such as “North Entrance.”

 

 

The description can include any combination of up to 32 letters, numbers,

 

 

and spaces.

 

 

Enable LED Operations

Check this check box if you want the Ready LED or Activity LED on the

 

 

front of the IP camera to light when the IP camera receives power or

 

 

performs an activity.

 

 

If you do not check this check box, these LEDs do not light.

 

 

Current Date/Time

Display only. Current date and time of the internal clock of the IP camera.

 

 

To change the date or time, click Change to display the Set Date/Time

 

 

window, then take the appropriate action:

 

 

To synchronize the IP camera date and time with the date and time of the

 

 

PC that you are using, click Sync with PC.

 

 

To set the IP camera date and time to any values, enter the values in the

 

 

New Date and New Time fields, then click Set New Time.

 

 

To exit the Date/Time window, click Close.

 

 

 

Time Zone

 

From the drop-down list, choose the time zone in which the IP camera is

 

 

located.

 

 

The time that appears when you view video from this IP camera reflects this

 

 

time zone.

 

 

Adjust for Daylight

Check this check box if you want the time of the IP camera to adjust

Saving Time

 

automatically for daylight saving time.

 

 

Check here if you want

Check this check box if you want the IP camera to obtain its time from a

to update the time

network time protocol (NTP) server.

automatically from the

If you check this check box, the camera contacts the designated NTP server

NTP server from the

every 64 seconds and synchronizes its internal clock with the time of that

Internet

 

 

server.

 

 

 

 

NTP Server Address

If you configured the IP camera to obtain its time from an NTP server, enter

 

 

the IP address of the NTP server.

 

 

 

NTP Port

 

If you configured the IP camera to obtain its time from an NTP server, enter

 

 

the NTP server port number.

 

 

The default value is 123.

 

 

 

Cisco Video Surveillance System 2621 IP Dome User Guide

3-6

OL-24129-02

 

 

Image 48
Contents Cisco Video Surveillance 2621 IP Dome User Guide Americas HeadquartersCisco Video Surveillance System 2621 IP Dome User Guide N T E N T S Using the IP Camera with Cisco VSM Overview OrganizationViii Features Features, IP Camera Overview,Physical Details, Package Contents, IP Camera OverviewPhysical Details Top of the 2621 IP DomeOverview IP Camera Overview Described in the Resetting the IP Camera section on Bottom of the 2621 IP DomePackage Contents Getting Started Before You BeginInstalling the Cisco Video Surveillance 2621 IP Dome Preparing for Installation, Mounting with a Junction Box,Preventing Electrostatic Discharge Damage Preparing for Installation Passing the Audio Cable through a Ferrite CoreProcedure Mounting with a Junction BoxDisassembling the 2621 IP Dome Components Attaching the Base Plate to a Junction Box Attaching the Camera Unit to the Base Plate Cisco Video Surveillance System 2621 IP Dome User Guide Mounting with a Conduit Base Attaching the Privacy Shield and DomeBase plate Camera unit Camera unit screws Attaching the Conduit Base to a Surface Attaching the Base Plate to the Conduit Base See -1 on Cisco Video Surveillance System 2621 IP Dome User Guide 10 Attaching the Privacy Shield and Dome Mounting to a Ceiling Tile 11 Disassembling the 2621 IP Dome Components 12 Preparing the 2621 IP Dome Ceiling Tile See -1 on Mounting on a Solid Surface 13 Securing Torx Screws14 Disassembling the 2621 IP Dome Components See -1 on Performing the Initial Setup of the IP Camera 15 Securing Torx ScrewsProtocol//ipaddress Accessing the IP Camera Windows Https//192.168.0.100Https//203.70.212.521024 Http//203.70.212.52Adjusting the Video Image Http//203.70.212.52102416 Adjusting the Camera Lens on the 2621 IP Dome Powering the IP Camera On or Off Resetting the IP CameraReset Type Procedure Remarks Initial Setup of the IP CameraCleaning the IP Camera OL-24129-02 Configuring and Managing the IP Camera Configuration OverviewConfiguration Item Explanation Guidelines for Use Reference See the Alarm I/O Ports See the Audio Window sectionSee the Privacy Region See the Focus/Zoom WindowNavigating the Configuration Windows SnmpSetup Windows Basic Setup WindowDevice Settings Option DescriptionOption Description Advanced Setup Window Network SettingsOption BonjourOption Description IP Filter Window QoSEapol Window EAP-TLS OptionsEAP-FAST Options Administration Windows Users Window, Maintenance Window, Firmware Window,Users Window Administrator User ListMaintenance Window Firmware Window Audio/Video Windows Video WindowDual Streams MPEG-4 + Mjpeg -Configures MPEG-4 for SettingsMPEG-4 Settings Mjpeg Settings Resolution Choose the resolution of the Mjpeg video streamVideo Adjustment PAL/50 HzOptions Day/Night VisionOption Description Audio Window Controls section onDuplex Talk and Listen Privacy Region Window Focus/Zoom WindowChoose Simplex Talk Only , Half Duplex Talk or Listen , or Full Duplex Talk and ListenSecurity Windows Initialization WindowInitialization Window, Complexity Window, Complexity Window Users Window section onApplications Windows Mail/FTP/HTTP WindowDescribed in the Basic Setup Window section on Mail SetupPrimary Smtp Server Secondary Smtp ServerMail Body Primary FTPSecondary FTP Http NotificationMotion Detection Window System-provided-name-value-pairs is the event informationEvent Window Event Schedule New ScheduleClear button Trigger EventMail/FTP/HTTP Window section on AttachmentSnmp Window Alarm I/O Ports Window Alarm Input SettingsAlarm Output Settings Manual Control SettingsStatus Windows System WindowSystem Status Audio Setting Audio/Video WindowNetwork Window Syslog & Log WindowLocal Log Sys Log ServerLog List Message ExplanationSystem log messages Syslog and Log Information Address Address1 Port1 Address2 Port2 , User FTP log messagesVideo Log Window Smtp log messagesDelete button Delete All buttonOL-24129-02 Viewing Video through the Home Window Overview Home Window OverviewHome Window Home Window Controls Control DescriptionDigital zoom controls Audio controlsSnapshot controls SaveIP camera controls For related information, see the Video Window section onAccessing the Primary H.264 Stream Accessing Secondary H.264 StreamViewing Video through Third-Party Devices or Software Accessing the Primary MPEG-4 Stream Accessing Dual MPEG-4 StreamsAccessing the Mjpeg Stream Accessing Dual Streams H.264 + MjpegAccessing Dual Streams MPEG-4 + Mjpeg OL-24129-02 Troubleshooting Troubleshooting Using the IP Camera with Cisco VSM For instructions, see the Video Window section onOL-24129-02 D E IN-2 IN-3 IN-4 IN-5 IN-6 IN-7 IN-8
Related manuals
Manual 108 pages 3.3 Kb