Cisco Systems Guide to Configuring and Managing Security Camera Settings for the IP Camera Model CIVS-IPC-2621V

Chapter 3 Configuring and Managing the IP Camera

Applications Windows

If you change any options in the Mail/FTP/HTTP window, you must click Save to save the changes. To discard the changes, click Cancel before clicking Save. These buttons appear at the bottom of the window. You may need to scroll down to see them.

Table 3-15describes the options in the Mail/FTP/HTTP window.

Table 3-15 Mail/FTP/HTTP Window Options

		Option	Description
		Primary SMTP Server
		Primary SMTP	Check this check box to enable e-mail event notification messages to be sent
			to the primary Simple Mail Transport Protocol (SMTP) server.
			Note For e-mail event notification to work, it must also be an enabled
			action for a trigger event as described in the “Event Window” section
			on page 3-31.
		SMTP Mail Server	Enter the name or IP address of the primary SMTP server.
			If you enter a name, you must configure the Primary DNS option as
			described in the “Basic Setup Window” section on page 3-5.
		Authentication	If the primary SMTP server requires authentication to send e-mail, choose
			the appropriate authentication type. The authentication type typically is the
			same as that for the POP3 server that you use to receive e-mail.
		Account Name	If the primary SMTP server requires authentication, enter the account name
			for the server.
		Password	If the primary SMTP server requires authentication, enter the account
			password for the server.
		POP Server Name	Enter the name of the POP3 mail server that you use to receive e-mail.
		Secondary SMTP Server
		Secondary SMTP	Check this check box to cause e-mail messages to be sent to a secondary
			(backup) SMTP server if the primary SMTP server is unavailable.
		SMTP Mail Server	Enter the IP address of the secondary SMTP server.
		Authentication	If the secondary SMTP server requires authentication to send e-mail, choose
			the appropriate authentication type. The authentication type typically is the
			same as that for the POP3 server that you use to receive e-mail.
		Account Name	If the secondary SMTP server requires authentication, enter the account
			name for the server.
		Password	If the secondary SMTP server requires authentication, enter the account
			password for the server.
		POP Server Name	Enter the name of the POP3 mail server that you use to receive e-mail.
		E-Mail Setup
		Send To	Enter at least 1 e-mail address to which e-mail messages are sent when an
			event occurs. The second and third addresses are optional.
		Show “From” as	Enter the e-mail address to be shown in the From field for e-mail messages
			that are sent when an event occurs.
		Subject	Enter the text to be shown in the Subject field for the e-mail messages that
			the IP camera sends when events occur. The subject can contain up to 48
			characters, including spaces.
	Cisco Video Surveillance System 2621 IP Dome User Guide
3-28			OL-24129-02