Chapter 3 Configuring and Managing the IP Camera
Setup Windows
Table | IP Filter Window Options (continued) | |
|
|
|
Option |
| Description |
|
|
|
Single/Range |
| If you enable IP address filtering, choose either of the following options |
|
| from as many |
|
| • |
|
| camera, depending on the Options setting. |
|
| • |
|
| the IP camera, depending on the Options setting. |
|
|
|
EAPOL Window
The EAPOL window provides options for configuring Extensible Authentication Protocol Over LANs (EAPOL). This protocol is used to authenticate and control user traffic in an 802.1x network.
To display the EAPOL window, access the configuration windows as described in the “Accessing the IP Camera Windows” section on page
If you change any options in the EAPOL window, you must click Save to save the changes. To discard the changes, click Cancel before clicking Save. These buttons appear at the bottom of the window. You may need to scroll down to see them.
Table
Table
Option | Description |
|
|
Enable EAPOL | Check this check box to enable EAPOL on the IP camera. |
|
|
|
|
Note These options appear if you check the Enable EAPOL check box and then choose
User ID | User identifier that is used to log in to the RADIUS server. |
|
|
Root Certificate | Path and folder on this PC or location of a Windows network shared folder |
| where the root certificate file is stored. You can click Browse to find this |
| location. After you enter this information, click Upload to upload the |
| certificate from the local PC to the IP camera. |
|
|
Validate Root | Check this check box if you want the identity of the RADIUS server to be |
Certificate | validated. |
|
|
User Certificate | Path and folder on this PC where the user certificate file is stored. You can |
| click Browse to find this location. After you enter this information, click |
| Upload to upload the certificate from the local PC to the IP camera. |
|
|
Password | IP camera client log in password for the RADIUS server. |
|
|
|
|
Note These options appear if you check the Enable EAPOL check box and then choose
Allow Automatic PAC Provisioning
Check this check box if you want to allow authentication servers to establish a secure connection with the IP camera so that they can provide the IP camera with new Protected Access Credentials (PACs).
|
| Cisco Video Surveillance System 2621 IP Dome User Guide |
|
| |
|
|
| |||
|
|
|
| ||
|
|
|
|