Approach Tech LC-7314 manual Appendix 5. -FAQ, RMN0100242v1.1

Page 106

APPENDIX 5. –FAQ

1. How to disable the DHCP function and use a static IP instead?

A：Turn up the “DIP SWITCH” from “3” to “4” and change the relative network settings, the IP Address, NetMask and Gateway on the image web page.

2. Can the SD card be removed during recording?

A：No, it cannot be removed until the recording comes to a single point. The POWER LED flashing light signals the SD card is operating. The green light indicates the unit is activating. The red light warns the SD card cannot be removed. If the SD card is withdrawn in this mode, the card will break.

3. I’ve set the function of “Motion Detection” but it doesn’t seem to work.

A：Check if “Motion range” and “Sensitivity” have been set before activating the function.

4.My AVI files recorded in the SD card cannot be displayed. What can I do to display the files? A：Please visit “http://www.morgan-multimedia.com/” to download “Morgan M-JPEG codec” and install it, and then check the selection of the “IJP Core”.

5.How to turn on/off the OSD (on screen display) on/off on the IP Camera?

A：Visit the homepage - tailpage.htm of the device, and select "ON" or "OFF" in the OSD column. Example: suppose the IP address of the device is 192.168.1.168

Type in http://192.168.1.168/tailpage.htm ( a registration is needed) and select "ON" or "OFF" in the OSD column.

WARNING: Please write down the IP address of the device before you turn off the OSD.

RMN0100242v1.1

104

Image 106

Contents Installation Page Table Of Contents Operating Instructions for Image Software and Network Functions of client PCSafety Precautions Product Instructions Product FeaturesVideo Signal CameraVideo Codec Mjpeg AlarmVideo Codec Video Codec H.264Hardware PowerAudio Signal ApprovalsPTZ Support Device IndicatorAccessories PortsDescription of the FRONT/REAR View Front Panel and Rear PanelAlarm I/O RS-485 D+ DC OUTDIP Switch Flank PanelNetwork Setting PPPoE USB functionInstallation Connecting with a Multiplexer UPDATE.BIN IP Camera SD card Troubleshooting Cable Connections PC Wiring ConfigurationConnect to a computer Connect to a LAN Hub Intranet Enable Dhcp Function Configure Your IP Camera Network SettingsSet IP Address Page TCP/IP Communication Software TCP/IP Installation TCP/IP configuration setting Select TCP/IP, and then click PropertiesConnection Testing Click Start → Programs → MS-DOS PromptType Camera IP address RJ-45 socket Connecting the IP Camera Microsoft Internet ExplorerHomepage of H.264 mode Browsing images from the IP CameraChange Image Setting Page Click the Privacy Mask button to enter the Privacy Mask Fine Tune mode ResolutionDescription of function keys Change the Network Setting Description of function keys Change the Network Setting FTP Change the Network Setting Smtp Change the Network Setting Sntp Change the Network Setting Ddns Description of function keys Change the Network Setting PPPoE Change the Network Setting -UPnP Change the Network Setting IP Filter Change the Network Setting -Network Traffic Change the System Setting Set the Date and Time of the systemChange the System Setting Timestamp Change the System Setting Users Change the System Setting Digital I/O Change the System Setting Audio Mechanism Change the System Setting RS485 Setting Change the System Setting Update Firmware View the Event Logs Change the Application Setting Change the Application Setting SD Card Application Setting Change the Application Setting -SMTP Application Setting Change the Application Setting -Language Setting Description of function keys Change the Application Setting -Record Schedule Page Change the Application Setting -Motion Detection Change the SD card Setting Change the Pan/Tilt setting PPPoE & Ddns Using the PPPoE PPPoE SettingsDdns settings Test Go to the InternetSystem Requirements Introduction to the CMSInstall the CMS for the ZIP file Login the IP Camera software View the IP Camera video from a remote PCPreview the video of the IP Camera Add device Device SettingOperation Device Management Modify deviceDevice Setting Group Sequence Live ViewAdd Live View Group Delete Live View GroupRecording function PTZ Control PanelPC Playback Page DVR Remote Playback for DVR devices only Modify User ConfigUser List Add User Delete UserUser Information User Interface SettingsPath Settings User Group List Add Group UserSound Settings Image SettingsSequence Settings Record SettingsRecord Settings Setting areaWorking area Schedule barTray Tick on Enable ALARM-SAVE into SD Card to activate it QuestionUse IE to view the recorded files Set the recording time the AVI duration of the SD cardSet the PPPoE function Use the Sub Hostname to view the IP Camera Upload the recorded file via the FTPModify the user Set the upload rateAdd a new user Delete a userSpecifications Functions of client PC Appendix 1. -SCANIP Page Appendix 2. -IP Camera UPnP How To Check the IP class of your PCPage Page Install UPnP Packets Page Turn on Services Page Page Page Scan IP Cameras through My Network Place Setting the IP Address ARP and ping from Windows or MS-DOSARP and ping from Unix or GNU/Linux Set up the Ddns Registering for a Ddns Create an account101 102 103 Appendix 5. -FAQ RMN0100242v1.1