Approach Tech LC-7314 manual Connecting with a Multiplexer

Page 15

3.3 CONNECTING WITH A MULTIPLEXER

CAMERA VIDEO OUT BNC CONNECTOR

CAMERA 1

CAMERA 2

CAMERA 16

3.4 UPDATING SYSTEM SOFTWARE

If the system software of the IP Camera needs to be upgraded, please take the following steps to

safely process it.

Important: Before carrying out the following procedures, please ensure the SD card is

working and the file of the system firmware is intact

1.Format an SD card using the FAT16 format if it is unformatted; there are no limitations to an SD card’s capacity.

2.Create a directory named LANCAM in the SD card if it does not exist.

3.Copy the file of UPDATE.BIN to the LANCAM-directory.

4.If the IP Camera is running, please power it off first.

5.Insert the SD CARD into the IP Camera.

6.Remove the Ethernet cable from the RJ-45 port and then power on the IP Camera.

7.In 5 to 10 seconds, a message reading "UPDATE PROCESSING" will show up on the screen on a blue background; if not, please check out steps 1 to 6 carefully or else inform your technical support while ignoring the following steps.

8.DO NOT power off the IP Camera while this update process is running until the message "UPDATE OK RESET PLEASE" appears on the screen; it might take 15 to 30 seconds to appear.

13

Image 15

Contents Installation Page Table Of Contents Functions of client PC Operating Instructions for Image Software and NetworkSafety Precautions Camera Product FeaturesVideo Signal Product InstructionsVideo Codec H.264 AlarmVideo Codec Video Codec MjpegApprovals PowerAudio Signal HardwarePorts Device IndicatorAccessories PTZ SupportFront Panel and Rear Panel Description of the FRONT/REAR ViewRS-485 D+ DC OUT Alarm I/OFlank Panel DIP SwitchUSB function Network Setting PPPoEInstallation Connecting with a Multiplexer UPDATE.BIN IP Camera SD card Troubleshooting PC Wiring Configuration Cable ConnectionsConnect to a computer Connect to a LAN Hub Intranet Configure Your IP Camera Network Settings Enable Dhcp FunctionSet IP Address Page TCP/IP Communication Software TCP/IP Installation Select TCP/IP, and then click Properties TCP/IP configuration settingClick Start → Programs → MS-DOS Prompt Connection TestingType Camera IP address RJ-45 socket Microsoft Internet Explorer Connecting the IP CameraBrowsing images from the IP Camera Homepage of H.264 modeChange Image Setting Page Click the Privacy Mask button to enter the Privacy Mask Resolution Fine Tune modeDescription of function keys Change the Network Setting Description of function keys Change the Network Setting FTP Change the Network Setting Smtp Change the Network Setting Sntp Change the Network Setting Ddns Description of function keys Change the Network Setting PPPoE Change the Network Setting -UPnP Change the Network Setting IP Filter Change the Network Setting -Network Traffic Set the Date and Time of the system Change the System SettingChange the System Setting Timestamp Change the System Setting Users Change the System Setting Digital I/O Change the System Setting Audio Mechanism Change the System Setting RS485 Setting Change the System Setting Update Firmware View the Event Logs Change the Application Setting Change the Application Setting SD Card Application Setting Change the Application Setting -SMTP Application Setting Change the Application Setting -Language Setting Description of function keys Change the Application Setting -Record Schedule Page Change the Application Setting -Motion Detection Change the SD card Setting Change the Pan/Tilt setting PPPoE Settings PPPoE & Ddns Using the PPPoETest Go to the Internet Ddns settingsIntroduction to the CMS System RequirementsInstall the CMS for the ZIP file View the IP Camera video from a remote PC Login the IP Camera softwarePreview the video of the IP Camera Modify device Device SettingOperation Device Management Add deviceDevice Setting Delete Live View Group Live ViewAdd Live View Group Group SequencePTZ Control Panel Recording functionPC Playback Page DVR Remote Playback for DVR devices only Delete User ConfigUser List Add User Modify UserUser Group List Add Group User User Interface SettingsPath Settings User InformationRecord Settings Image SettingsSequence Settings Sound SettingsSetting area Record SettingsSchedule bar Working areaTray Question Tick on Enable ALARM-SAVE into SD Card to activate itSet the recording time the AVI duration of the SD card Use IE to view the recorded filesSet the PPPoE function Upload the recorded file via the FTP Use the Sub Hostname to view the IP CameraDelete a user Set the upload rateAdd a new user Modify the userSpecifications Functions of client PC Appendix 1. -SCANIP Page Check the IP class of your PC Appendix 2. -IP Camera UPnP How ToPage Page Install UPnP Packets Page Turn on Services Page Page Page Scan IP Cameras through My Network Place ARP and ping from Windows or MS-DOS Setting the IP AddressARP and ping from Unix or GNU/Linux Registering for a Ddns Create an account Set up the Ddns101 102 103 RMN0100242v1.1 Appendix 5. -FAQ