Approach Tech LC-7314 manual Change the System Setting Update Firmware

Page 51

Change the System Setting — Update Firmware.

Please follow the steps below to change the Audio Mechanism through the network if necessary.

1.Click the Update Firmware button on the left side of the “Date and Time” page to enter the “Update Firmware” page.

2.Click the “Browse…” button to select the UPDATE.BIN file which was copied into your computer.

3.Click the “Update” button.

4.DO NOT power off the IP Camera while this update process is running.

Note: Don’t interrupt the process while the unit is updating itself.

Note: Please make sure that the UPDATE.BIN file is fit in with the model of the unit. Updating with the wrong UPDATE.BIN file may cause any physical damage to the device.

Note: The Temporary Internet Files (or cache) folder contains Web page content that is stored on your

hard disk for quick viewing. We suggest deleting the Temporary Internet Files immediately after

updating the firmware. To delete the files in the Temporary Internet Files folder, follow these steps:

1.Quit Internet Explorer and quit any instances of Windows Explorer.

2.Click Start, click Control Panel, and then double-click Internet Options.

3.On the General tab, click Delete Files under Temporary Internet Files.

4.In the Delete Files dialog box, click to select the Delete all offline content check box, and then click OK.

5.Click OK.

49

Image 51
Contents Installation Page Table Of Contents Functions of client PC Operating Instructions for Image Software and NetworkSafety Precautions Camera Product FeaturesVideo Signal Product InstructionsVideo Codec H.264 AlarmVideo Codec Video Codec MjpegApprovals PowerAudio Signal HardwarePorts Device IndicatorAccessories PTZ SupportFront Panel and Rear Panel Description of the FRONT/REAR ViewRS-485 D+ DC OUT Alarm I/OFlank Panel DIP SwitchUSB function Network Setting PPPoEInstallation Connecting with a Multiplexer UPDATE.BIN IP Camera SD card Troubleshooting PC Wiring Configuration Cable ConnectionsConnect to a computer Connect to a LAN Hub Intranet Configure Your IP Camera Network Settings Enable Dhcp FunctionSet IP Address Page TCP/IP Communication Software TCP/IP Installation Select TCP/IP, and then click Properties TCP/IP configuration settingClick Start → Programs → MS-DOS Prompt Connection TestingType Camera IP address RJ-45 socket Microsoft Internet Explorer Connecting the IP CameraBrowsing images from the IP Camera Homepage of H.264 modeChange Image Setting Page Click the Privacy Mask button to enter the Privacy Mask Resolution Fine Tune modeDescription of function keys Change the Network Setting Description of function keys Change the Network Setting FTP Change the Network Setting Smtp Change the Network Setting Sntp Change the Network Setting Ddns Description of function keys Change the Network Setting PPPoE Change the Network Setting -UPnP Change the Network Setting IP Filter Change the Network Setting -Network Traffic Set the Date and Time of the system Change the System SettingChange the System Setting Timestamp Change the System Setting Users Change the System Setting Digital I/O Change the System Setting Audio Mechanism Change the System Setting RS485 Setting Change the System Setting Update Firmware View the Event Logs Change the Application Setting Change the Application Setting SD Card Application Setting Change the Application Setting -SMTP Application Setting Change the Application Setting -Language Setting Description of function keys Change the Application Setting -Record Schedule Page Change the Application Setting -Motion Detection Change the SD card Setting Change the Pan/Tilt setting PPPoE Settings PPPoE & Ddns Using the PPPoETest Go to the Internet Ddns settingsIntroduction to the CMS System RequirementsInstall the CMS for the ZIP file View the IP Camera video from a remote PC Login the IP Camera softwarePreview the video of the IP Camera Modify device Device SettingOperation Device Management Add deviceDevice Setting Delete Live View Group Live ViewAdd Live View Group Group SequencePTZ Control Panel Recording functionPC Playback Page DVR Remote Playback for DVR devices only Delete User ConfigUser List Add User Modify UserUser Group List Add Group User User Interface SettingsPath Settings User InformationRecord Settings Image SettingsSequence Settings Sound SettingsSetting area Record SettingsSchedule bar Working areaTray Question Tick on Enable ALARM-SAVE into SD Card to activate itSet the recording time the AVI duration of the SD card Use IE to view the recorded filesSet the PPPoE function Upload the recorded file via the FTP Use the Sub Hostname to view the IP CameraDelete a user Set the upload rateAdd a new user Modify the userSpecifications Functions of client PC Appendix 1. -SCANIP Page Check the IP class of your PC Appendix 2. -IP Camera UPnP How ToPage Page Install UPnP Packets Page Turn on Services Page Page Page Scan IP Cameras through My Network Place ARP and ping from Windows or MS-DOS Setting the IP AddressARP and ping from Unix or GNU/Linux Registering for a Ddns Create an account Set up the Ddns101 102 103 RMN0100242v1.1 Appendix 5. -FAQ