Approach Tech LC-7314 manual Installation

Page 14

3. INSTALLATION

Please follow the instructions and the diagram below to set up the system.

NOTE: The IP Camera is linked by its Video Out connection via a BNC connector to a monitor's Video In connection. If this connection is there, you can see some information on the monitor screen, such as the IP Camera factory default Static IP address(192.168.1.168). But the IP Camera Static IP address can only appear if there is a connection between the IP Camera and another device. If there is no such connection, the IP Camera factory default Static IP address will not appear on the monitor screen.

3.1 CONNECTING WITH AN NVR

Use a straight LAN cable to connect directly to an NVR.

CAMERA

CONNECT TO ETHERNET

RJ45 CONNECTOR

CONNECT TO NVR

ETHERNET PORT

VIDEOAUDIO

ETHERNET

10/100

OUT OUT

SD Card

RS-485

RS-232

ALARM I/O

DC12V

3.2 CONNECTING WITH A DVR

CONNECT TO VIDEO OUT			CAMERA
BNC CONNECTOR

CONNECT TO DVR
VIDEO IN
			SD Card
	FROM MUX
VIDEO	MAIN MONITOR
		AUDIO	RS-485
			RS-485
	IN	IN
		ETHERNET	RS-232
		10/100
OUT		OUT
OUT
TO	TO		ALARM	I/O	DC12V
MUX'S VCR IN	MONITOR		ALARM	I/O
MUX'S VCR IN	MONITOR
			12

Image 14

Contents Installation Page Table Of Contents Operating Instructions for Image Software and Network Functions of client PCSafety Precautions Product Instructions Product FeaturesVideo Signal CameraVideo Codec Mjpeg AlarmVideo Codec Video Codec H.264Hardware PowerAudio Signal ApprovalsPTZ Support Device IndicatorAccessories PortsDescription of the FRONT/REAR View Front Panel and Rear PanelAlarm I/O RS-485 D+ DC OUTDIP Switch Flank PanelNetwork Setting PPPoE USB functionInstallation Connecting with a Multiplexer UPDATE.BIN IP Camera SD card Troubleshooting Connect to a computer PC Wiring ConfigurationCable Connections Connect to a LAN Hub Intranet Set IP Address Configure Your IP Camera Network SettingsEnable Dhcp Function Page TCP/IP Communication Software TCP/IP Installation TCP/IP configuration setting Select TCP/IP, and then click PropertiesConnection Testing Click Start → Programs → MS-DOS PromptType Camera IP address RJ-45 socket Connecting the IP Camera Microsoft Internet ExplorerHomepage of H.264 mode Browsing images from the IP CameraChange Image Setting Page Click the Privacy Mask button to enter the Privacy Mask Description of function keys ResolutionFine Tune mode Change the Network Setting Description of function keys Change the Network Setting FTP Change the Network Setting Smtp Change the Network Setting Sntp Change the Network Setting Ddns Description of function keys Change the Network Setting PPPoE Change the Network Setting -UPnP Change the Network Setting IP Filter Change the Network Setting -Network Traffic Change the System Setting Set the Date and Time of the systemChange the System Setting Timestamp Change the System Setting Users Change the System Setting Digital I/O Change the System Setting Audio Mechanism Change the System Setting RS485 Setting Change the System Setting Update Firmware View the Event Logs Change the Application Setting Change the Application Setting SD Card Application Setting Change the Application Setting -SMTP Application Setting Change the Application Setting -Language Setting Description of function keys Change the Application Setting -Record Schedule Page Change the Application Setting -Motion Detection Change the SD card Setting Change the Pan/Tilt setting PPPoE & Ddns Using the PPPoE PPPoE SettingsDdns settings Test Go to the InternetSystem Requirements Introduction to the CMSInstall the CMS for the ZIP file Login the IP Camera software View the IP Camera video from a remote PCPreview the video of the IP Camera Add device Device SettingOperation Device Management Modify deviceDevice Setting Group Sequence Live ViewAdd Live View Group Delete Live View GroupRecording function PTZ Control PanelPC Playback Page DVR Remote Playback for DVR devices only Modify User ConfigUser List Add User Delete UserUser Information User Interface SettingsPath Settings User Group List Add Group UserSound Settings Image SettingsSequence Settings Record SettingsRecord Settings Setting areaWorking area Schedule barTray Tick on Enable ALARM-SAVE into SD Card to activate it QuestionSet the PPPoE function Set the recording time the AVI duration of the SD cardUse IE to view the recorded files Use the Sub Hostname to view the IP Camera Upload the recorded file via the FTPModify the user Set the upload rateAdd a new user Delete a userSpecifications Functions of client PC Appendix 1. -SCANIP Page Appendix 2. -IP Camera UPnP How To Check the IP class of your PCPage Page Install UPnP Packets Page Turn on Services Page Page Page Scan IP Cameras through My Network Place Setting the IP Address ARP and ping from Windows or MS-DOSARP and ping from Unix or GNU/Linux Set up the Ddns Registering for a Ddns Create an account101 102 103 Appendix 5. -FAQ RMN0100242v1.1