Approach Tech LC-7314 manual Hardware, Approvals, Power, Physical Property, Audio Signal, Network

Page 8

Network active alarm notification: Yes (ANNP)

Hardware:

Processors:

Texas Instruments DaVinci

High performance 32-bit RISC CPU

 

DDRII memory:

DDRII 1Gbit

Flash memory:

256Mb

Real-time clock:

Built-in

Real-time clock battery:

Built-in

Watchdog:

Built-in

Firmware upgrade:

SD Card/FTP/HTTP

Approvals:

 

FCC:

Yes

CE:

Yes

RoHS:

Yes

Power:

 

DC 12V:

Yes Max (TBD Watt)

AC 24V:

Yes

PoE:

Power over Ethernet (IEEE 802.3af)

Physical Property:

 

Height:

50mm

Width:

62mm

Length:

95mm

Weight:

360 g

MTBF:

1350000Hours

Operating Temperature:

0℃ to 50℃ (32℉ to 122℉)

Operations Humidity:

30% to 80 %

Storage temperature:

-20℃to 60℃(-4℉to 140℉)

Audio Signal:

 

Number of tracks:

Mono 1 channel

Audio sample rate:

16 KHz sampling-ulaw

Audio output:

1K ohms

Audio input:

Built-in Microphone or LINE in10k ohms 1.0Vpp

Network Audio Stream:

Available

USB:

 

Type:

2.0 * 1

Capacity:

24Mbit

Network settings configurable: Yes

Network:

 

Ethernet:

Ethernet (10/100 Base-T), RJ-45 connector

MDIX:

Yes

Security:

3-Level password protection

 

IP address filtering

 

User access log

Protocol:

TCP/IP, UDP, ARP, ICMP, DNS, DHCP, HTTP, SNTP, PPPoE,

 

DDNS, UpnP, FTP, SMTP

Management console:

Full function

Throughput:

19M bit/second

Bandwidth control:

Yes

Simultaneous users:

8

DDNS:

Dyndns

IE recording support:

Yes

Storage:

 

SD Card Support:

MMC/SD/SDHC 2.0 32MB~32GB

Pre-alarm:

Yes

6

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Installation Page Table Of Contents Operating Instructions for Image Software and Network Functions of client PCSafety Precautions Product Features Video SignalProduct Instructions CameraAlarm Video CodecVideo Codec Mjpeg Video Codec H.264Power Audio SignalHardware ApprovalsDevice Indicator AccessoriesPTZ Support PortsDescription of the FRONT/REAR View Front Panel and Rear PanelAlarm I/O RS-485 D+ DC OUTDIP Switch Flank PanelNetwork Setting PPPoE USB functionInstallation Connecting with a Multiplexer UPDATE.BIN IP Camera SD card Troubleshooting Connect to a computer PC Wiring ConfigurationCable Connections Connect to a LAN Hub Intranet Set IP Address Configure Your IP Camera Network SettingsEnable Dhcp Function Page TCP/IP Communication Software TCP/IP Installation TCP/IP configuration setting Select TCP/IP, and then click PropertiesConnection Testing Click Start → Programs → MS-DOS PromptType Camera IP address RJ-45 socket Connecting the IP Camera Microsoft Internet ExplorerHomepage of H.264 mode Browsing images from the IP CameraChange Image Setting Page Click the Privacy Mask button to enter the Privacy Mask Description of function keys ResolutionFine Tune mode Change the Network Setting Description of function keys Change the Network Setting FTP Change the Network Setting Smtp Change the Network Setting Sntp Change the Network Setting Ddns Description of function keys Change the Network Setting PPPoE Change the Network Setting -UPnP Change the Network Setting IP Filter Change the Network Setting -Network Traffic Change the System Setting Set the Date and Time of the systemChange the System Setting Timestamp Change the System Setting Users Change the System Setting Digital I/O Change the System Setting Audio Mechanism Change the System Setting RS485 Setting Change the System Setting Update Firmware View the Event Logs Change the Application Setting Change the Application Setting SD Card Application Setting Change the Application Setting -SMTP Application Setting Change the Application Setting -Language Setting Description of function keys Change the Application Setting -Record Schedule Page Change the Application Setting -Motion Detection Change the SD card Setting Change the Pan/Tilt setting PPPoE & Ddns Using the PPPoE PPPoE SettingsDdns settings Test Go to the InternetSystem Requirements Introduction to the CMSInstall the CMS for the ZIP file Login the IP Camera software View the IP Camera video from a remote PCPreview the video of the IP Camera Device Setting Operation Device ManagementAdd device Modify deviceDevice Setting Live View Add Live View GroupGroup Sequence Delete Live View GroupRecording function PTZ Control PanelPC Playback Page DVR Remote Playback for DVR devices only Config User List Add UserModify User Delete UserUser Interface Settings Path SettingsUser Information User Group List Add Group UserImage Settings Sequence SettingsSound Settings Record SettingsRecord Settings Setting areaWorking area Schedule barTray Tick on Enable ALARM-SAVE into SD Card to activate it QuestionSet the PPPoE function Set the recording time the AVI duration of the SD cardUse IE to view the recorded files Use the Sub Hostname to view the IP Camera Upload the recorded file via the FTPSet the upload rate Add a new userModify the user Delete a userSpecifications Functions of client PC Appendix 1. -SCANIP Page Appendix 2. -IP Camera UPnP How To Check the IP class of your PCPage Page Install UPnP Packets Page Turn on Services Page Page Page Scan IP Cameras through My Network Place Setting the IP Address ARP and ping from Windows or MS-DOSARP and ping from Unix or GNU/Linux Set up the Ddns Registering for a Ddns Create an account101 102 103 Appendix 5. -FAQ RMN0100242v1.1
Top Page Image Contents