deXlan MPEG4 user manual Url http//Network Camera/protocol.html

Page 16

The TCP protocol allows for less packet loss and produce a more accurate video display. The downside with this protocol is that the real-time effect is worse than that with the UDP protocol.

The HTTP protocol must be selected if the network is protected by a firewall and it only allows HTTP Port (80) to be opened. In this mode, audio will not be sent and only video is operational. If no special need is required, UDP protocol is recommended. Generally speaking, the client’s choice will be in the order of UDP TCP HTTP. After the Network Camera is connected successfully, “Protocol Option” will indicate the selected protocol. The selected protocol will be recorded in the user's PC and will be used for the next connection. If the network environment is changed, or the user wants to let the web browser to detect again, manually select the UDP protocol, save, and return HOME to re-connect.

<url> http://<Network Camera>/protocol.html

<Network Camera> is the domain name or the original IP address of the Network Camera.

16

Image 16

Contents MPEG4 Before You Use This Product Page Package Contents Wireless Model Only Hardware InstallationTo install in Ethernet To install in wireless LAN Wireless Model Only Software Installation Page Page Check Network Settings Initial Access to the Network CameraAdd Password to Prevent Unauthorized Access How to Use Authentication Installing Plug-in Primary User’s Capabilities ConfigurationMain Screen with Camera View Camera View Pan/Tilt Control ButtonsClient Settings Url http//Network Camera/protocol.html Fine-Tuning for Best Performance Administrator’s CapabilitiesFor Best Real-time Video Images Somewhere Between Real-time and Clear Images Only Quality Images Will DoProtect Network Camera by passwords Opening Accounts for New UsersDemo on multiple sites mid-scale service Product demo for e-business Large-scale ServiceBuilding a Multimedia Web Attraction Site More flexible options for viewersPage Page Building a Security Application Send snapshots when motion is detected Page 耟Software Revision Upgrade Definitions in Configuration System Parameters User Group Administration Network Settings GeneralWlan Configuration For Wireless Model Only StreamingPage Mail & FTP SmtpPage Video Codec Parameters Motion Detection Page Weekly Schedule Application SetupEvent Operation Sequential Operation Camera Control Camera Control AreaPreset Function Area UPnP and Ddns Settings Remote Controller Viewing System Log Factory DefaultViewing System Parameters Configuring the Network Camera behind a IP Sharing Router Page Troubleshooting AppendixFrequently Asked Questions Page Page Page URL Commands of the Network Camera Restart the Network Camera without warning URL System Resource URLGeneral Format of Command URL System Configuration URLSecurity Configuration URL Network Configuration URLDdns & UPnP Configuration URL Mail&FTP Configuration URL Audio/Video Configuration URL Camera Control URL Normal imageImage Quality Configuration URL Application Configuration URLSeconds interval for sequential mode Technical Specifications NetworkingElectromagnetic Compatibility EMC