Mail & FTP
SMTP
“SMTP (mail) server 1” The domain name or IP address of the external email server. “Recipient email address 1” The email address of the recipients for snapshots or log file. Multiple recipients must be separated by semicolons, ‘;’.
“SMTP (mail) server 2” The domain name or IP address of another email server once the previous server is unreachable.
“Recipient email address 2” The email addresses of the recipients for the backup server.
“Return email address” The return email address used in the event the mails fail to be sent out.
FTP
“Local FTP server port” This can be other than the default Port 21. The user can change this value from 1 to 65535. After the change, the external FTP client program must change the server port of connection accordingly.
“1st FTP server” The domain name or the IP address of the external FTP server. The following user settings must be correctly configured for remote access.
“1st FTP user name” Granted user name on the external FTP server. “1st FTP password” Granted password on the external FTP server.
“1st FTP remote folder” Granted folder on the external FTP server. The string must conform to that of the external FTP server. Some FTP servers cannot accept preceding slash symbol before the path without virtual path mapping. Refer to the instructions for the external FTP server for details. The folder privilege must be open for upload.
“Primary FTP passive mode” The Network Camera is located inside the network protected by a firewall, data connection for FTP may be prohibited. By selecting passive mode, the FTP can bypass the rule and allow snapshot upload to proceed. If the passive mode is selected, the Network Camera can automatically attempt for active mode, if the external FTP server does not support passive mode.
“2nd FTP server” The domain name or IP address of the backup external FTP server.
33