deXlan MPEG4 user manual Administrator’s Capabilities, Fine-Tuning for Best Performance

Page 17

Administrator’s Capabilities

Fine-Tuning for Best Performance

There are a few choices the Administrator is allowed to maximize the capabilities of the Network Camera. Best performance generally equates to the fastest image refresh rate with the best video quality, and at the lowest network bandwidth as possible. The three factors, “Maximum frame rate”, “Fix bit rate”, and “Fix quality” on the Video Configuration page, are correlative to allow for achieving the best performance possible.

For Best Real-time Video Images

To achieve good real-time visual effect, the network bandwidth should be large enough to allow a transmission rate of greater than 20 image frames per second. If the broadband network is over 1 Mbps, set the “Fix bit rate” to 1000Kbps or 1200Kbps, and set “Fix quality” at the highest quality. The maximum frame rate is 25 fps in a 50Hz system and 30 fps in a 60Hz system. If your network bandwidth is more than 384Kbps, you can fix the bit rate according to your bandwidth and set the maximum frame rate

17

Image 17

Contents MPEG4 Before You Use This Product Page Package Contents To install in Ethernet Hardware InstallationWireless Model Only To install in wireless LAN Wireless Model Only Software Installation Page Page Add Password to Prevent Unauthorized Access Initial Access to the Network CameraCheck Network Settings How to Use Authentication Installing Plug-in Main Screen with Camera View ConfigurationPrimary User’s Capabilities Pan/Tilt Control Buttons Camera ViewClient Settings Url http//Network Camera/protocol.html For Best Real-time Video Images Administrator’s CapabilitiesFine-Tuning for Best Performance Only Quality Images Will Do Somewhere Between Real-time and Clear ImagesOpening Accounts for New Users Protect Network Camera by passwordsProduct demo for e-business Large-scale Service Demo on multiple sites mid-scale serviceBuilding a Multimedia Web Attraction Site More flexible options for viewersPage Page Building a Security Application Send snapshots when motion is detected Page 耟Software Revision Upgrade Definitions in Configuration System Parameters User Group Administration General Network SettingsStreaming Wlan Configuration For Wireless Model OnlyPage Smtp Mail & FTPPage Video Codec Parameters Motion Detection Page Event Operation Application SetupWeekly Schedule Sequential Operation Camera Control Area Camera ControlPreset Function Area UPnP and Ddns Settings Remote Controller Viewing System Parameters Factory DefaultViewing System Log Configuring the Network Camera behind a IP Sharing Router Page Appendix TroubleshootingFrequently Asked Questions Page Page Page URL Commands of the Network Camera Restart the Network Camera without warning System Resource URL URLSystem Configuration URL General Format of Command URLNetwork Configuration URL Security Configuration URLDdns & UPnP Configuration URL Mail&FTP Configuration URL Audio/Video Configuration URL Normal image Camera Control URLApplication Configuration URL Image Quality Configuration URLSeconds interval for sequential mode Networking Technical SpecificationsElectromagnetic Compatibility EMC