deXlan MPEG4 user manual

Page 51

3.Change your PC’s IP address from 192.168.300.25 to 192.168.0.25. To verify make sure the first 3 sections of the IP address of the Network Camera corresponds to the first 3 sections of the PC. But you can not set the same IP address of Network Camera and your PC.

4.Restart Computer

5.Click the “IP Installer” button, find the Camera and click on “Link to selected device” button, now you will connect the I.E. to the Camera.

6.Check Page.12 to Install Plun-in.

7.Click “Configuration” on the main screen.

8.Click “Network” and change the IP address from 192.168.0.99 to 192.168.300.99 The new IP address must be a free IP address in your LAN.

9.Change your PC’s address back.

10.Restart Computer.

51

Image 51
Contents MPEG4 Before You Use This Product Page Package Contents Hardware Installation Wireless Model OnlyTo install in Ethernet To install in wireless LAN Wireless Model Only Software Installation Page Page Initial Access to the Network Camera Check Network SettingsAdd Password to Prevent Unauthorized Access How to Use Authentication Installing Plug-in Configuration Primary User’s CapabilitiesMain Screen with Camera View Pan/Tilt Control Buttons Camera ViewClient Settings Url http//Network Camera/protocol.html Administrator’s Capabilities Fine-Tuning for Best PerformanceFor Best Real-time Video Images Only Quality Images Will Do Somewhere Between Real-time and Clear ImagesOpening Accounts for New Users Protect Network Camera by passwordsMore flexible options for viewers Demo on multiple sites mid-scale serviceProduct demo for e-business Large-scale Service Building a Multimedia Web Attraction SitePage Page Building a Security Application Send snapshots when motion is detected Page 耟Software Revision Upgrade Definitions in Configuration System Parameters User Group Administration General Network SettingsStreaming Wlan Configuration For Wireless Model OnlyPage Smtp Mail & FTPPage Video Codec Parameters Motion Detection Page Application Setup Weekly ScheduleEvent Operation Sequential Operation Camera Control Area Camera ControlPreset Function Area UPnP and Ddns Settings Remote Controller Factory Default Viewing System LogViewing System Parameters Configuring the Network Camera behind a IP Sharing Router Page Appendix TroubleshootingFrequently Asked Questions Page Page Page URL Commands of the Network Camera Restart the Network Camera without warning System Resource URL URLSystem Configuration URL General Format of Command URLNetwork Configuration URL Security Configuration URLDdns & UPnP Configuration URL Mail&FTP Configuration URL Audio/Video Configuration URL Normal image Camera Control URLApplication Configuration URL Image Quality Configuration URLSeconds interval for sequential mode Networking Technical SpecificationsElectromagnetic Compatibility EMC