deXlan MPEG4 user manual Viewing System Log, Viewing System Parameters, Factory Default

Page 44

Viewing System Log

Click on the link on the configuration page to view the system log file. The content of this file provides useful information about configuration and connections after system boot-up.

Viewing System Parameters

Click on this link on the configuration page to view the entire system’s parameter set. The content is the same as those in CONFIG.INI.

Factory Default

“Factory default”

Click on this link on the configuration page to restore factory default settings. Any changes made so far will be lost and the system will be reset to the initial factory settings. After clicking on the “Restore” button and make confirmation, the system will restart and require the installer program to set up the network again.

“Calibrate”

Recalibrate the home position to the default center to recover the tolerance cased by some external forces. This function is the same as the “Center” button on the Remote Controller. Please note that there is no confirming message box after clicking on the “Calibrate” button, the Network Camera will calibrate immediately.

44

Image 44

Contents MPEG4 Before You Use This Product Page Package Contents To install in Ethernet Hardware InstallationWireless Model Only To install in wireless LAN Wireless Model Only Software Installation Page Page Add Password to Prevent Unauthorized Access Initial Access to the Network CameraCheck Network Settings How to Use Authentication Installing Plug-in Main Screen with Camera View ConfigurationPrimary User’s Capabilities Camera View Pan/Tilt Control ButtonsClient Settings Url http//Network Camera/protocol.html For Best Real-time Video Images Administrator’s CapabilitiesFine-Tuning for Best Performance Somewhere Between Real-time and Clear Images Only Quality Images Will DoProtect Network Camera by passwords Opening Accounts for New UsersDemo on multiple sites mid-scale service Product demo for e-business Large-scale ServiceBuilding a Multimedia Web Attraction Site More flexible options for viewersPage Page Building a Security Application Send snapshots when motion is detected Page 耟Software Revision Upgrade Definitions in Configuration System Parameters User Group Administration Network Settings GeneralWlan Configuration For Wireless Model Only StreamingPage Mail & FTP SmtpPage Video Codec Parameters Motion Detection Page Event Operation Application SetupWeekly Schedule Sequential Operation Camera Control Camera Control AreaPreset Function Area UPnP and Ddns Settings Remote Controller Viewing System Parameters Factory DefaultViewing System Log Configuring the Network Camera behind a IP Sharing Router Page Troubleshooting AppendixFrequently Asked Questions Page Page Page URL Commands of the Network Camera Restart the Network Camera without warning URL System Resource URLGeneral Format of Command URL System Configuration URLSecurity Configuration URL Network Configuration URLDdns & UPnP Configuration URL Mail&FTP Configuration URL Audio/Video Configuration URL Camera Control URL Normal imageImage Quality Configuration URL Application Configuration URLSeconds interval for sequential mode Technical Specifications NetworkingElectromagnetic Compatibility EMC