deXlan MPEG4 user manual 耟Software Revision Upgrade

Page 26

耟Software Revision Upgrade

Customers can obtain the up-to-date software from the distributor. An easy-to-use Upgrade Wizard is provided to upgrade the Network Camera with just a few clicks. The upgrade function is opened to the Administrator only. To upgrade the system, follow the procedures below.

1.Download the firmware file named “FLASH.BIN” from the appropriate product folder.

2.Run the Upgrade Wizard and proceed following the prompts. Refer to the instructions of the Upgrade Wizard for details.

3.The whole process will finish in a few minutes and it will automatically restart the system.

If power fails during the writing process of Flash memory, the program in the

memory of the Network Camera may be destroyed permanently. If the Network Camera cannot restart properly, ask your dealer for technical service.

26

Image 26

Contents MPEG4 Before You Use This Product Page Package Contents To install in Ethernet Hardware InstallationWireless Model Only To install in wireless LAN Wireless Model Only Software Installation Page Page Add Password to Prevent Unauthorized Access Initial Access to the Network CameraCheck Network Settings How to Use Authentication Installing Plug-in Main Screen with Camera View ConfigurationPrimary User’s Capabilities Camera View Pan/Tilt Control ButtonsClient Settings Url http//Network Camera/protocol.html For Best Real-time Video Images Administrator’s CapabilitiesFine-Tuning for Best Performance Somewhere Between Real-time and Clear Images Only Quality Images Will DoProtect Network Camera by passwords Opening Accounts for New UsersBuilding a Multimedia Web Attraction Site Demo on multiple sites mid-scale serviceProduct demo for e-business Large-scale Service More flexible options for viewersPage Page Building a Security Application Send snapshots when motion is detected Page 耟Software Revision Upgrade Definitions in Configuration System Parameters User Group Administration Network Settings GeneralWlan Configuration For Wireless Model Only StreamingPage Mail & FTP SmtpPage Video Codec Parameters Motion Detection Page Event Operation Application SetupWeekly Schedule Sequential Operation Camera Control Camera Control AreaPreset Function Area UPnP and Ddns Settings Remote Controller Viewing System Parameters Factory DefaultViewing System Log Configuring the Network Camera behind a IP Sharing Router Page Troubleshooting AppendixFrequently Asked Questions Page Page Page URL Commands of the Network Camera Restart the Network Camera without warning URL System Resource URLGeneral Format of Command URL System Configuration URLSecurity Configuration URL Network Configuration URLDdns & UPnP Configuration URL Mail&FTP Configuration URL Audio/Video Configuration URL Camera Control URL Normal imageImage Quality Configuration URL Application Configuration URLSeconds interval for sequential mode Technical Specifications NetworkingElectromagnetic Compatibility EMC