deXlan MPEG4 user manual Configuring the Network Camera behind a IP Sharing Router

Page 45

Configuring the Network Camera behind a IP Sharing (Router)

If you are using a IP Sharing to share the Internet with one or more PCs, and IP Camera connected within LAN. These steps describe how to configured to allow remote viewing of the camera over the Internet.

You will need:

The Network Camera Ethernet Cable*1

A Wired or Wireless IP Sharing (Router) such as D-Link DI-604 Ethernet based PC for system configuration

Make sure the IP Camera is firmly connected to the IP Sharing.

Click on the IP installer to execute the installation program from the CD. Please follow the steps in the Quick Installation Guide to configure the Network Camera. The Network Camera will be assigned a local IP address the allows it to be recognized by the IP Sharing. Write down this IP address fro future reference.

The following steps generally apply to any IP Sharing running in your network. You may have different ways to set this function, please refer to your IP Sharing’s manual.

For D-Link DI-604 example

Follow these steps to configure the virtual server settings of your IP Sharing.

Click Enable

Select both under protocol type (TCP and UDP)

Enter your Network Camera’s local IP address in the private IP field.

If you are using the default Network Camera port settings, enter 80 in to the “Public” and “Private Port” section, click “ Apply”

Scheduling should be set to “Always” so that the Network Camera images can be accessed at any time.

Repeat the above steps adding ports 5001, 5002 and 5003 to both the “Public” and “Private Port” sections.

45

Image 45
Contents MPEG4 Before You Use This Product Page Package Contents Hardware Installation Wireless Model OnlyTo install in Ethernet To install in wireless LAN Wireless Model Only Software Installation Page Page Initial Access to the Network Camera Check Network SettingsAdd Password to Prevent Unauthorized Access How to Use Authentication Installing Plug-in Configuration Primary User’s CapabilitiesMain Screen with Camera View Pan/Tilt Control Buttons Camera ViewClient Settings Url http//Network Camera/protocol.html Administrator’s Capabilities Fine-Tuning for Best PerformanceFor Best Real-time Video Images Only Quality Images Will Do Somewhere Between Real-time and Clear ImagesOpening Accounts for New Users Protect Network Camera by passwordsProduct demo for e-business Large-scale Service Demo on multiple sites mid-scale serviceBuilding a Multimedia Web Attraction Site More flexible options for viewersPage Page Building a Security Application Send snapshots when motion is detected Page 耟Software Revision Upgrade Definitions in Configuration System Parameters User Group Administration General Network SettingsStreaming Wlan Configuration For Wireless Model OnlyPage Smtp Mail & FTPPage Video Codec Parameters Motion Detection Page Application Setup Weekly ScheduleEvent Operation Sequential Operation Camera Control Area Camera ControlPreset Function Area UPnP and Ddns Settings Remote Controller Factory Default Viewing System LogViewing System Parameters Configuring the Network Camera behind a IP Sharing Router Page Appendix TroubleshootingFrequently Asked Questions Page Page Page URL Commands of the Network Camera Restart the Network Camera without warning System Resource URL URLSystem Configuration URL General Format of Command URLNetwork Configuration URL Security Configuration URLDdns & UPnP Configuration URL Mail&FTP Configuration URL Audio/Video Configuration URL Normal image Camera Control URLApplication Configuration URL Image Quality Configuration URLSeconds interval for sequential mode Networking Technical SpecificationsElectromagnetic Compatibility EMC