Jensen CD1213 Liquid Crystal Display LCD, Display Disp, Auxiliary Input, Front Panel Release

Page 6

CD1213

CONTROL to select from the following Beep Tone options:

•BEEP ALL: Beep is heard any time a button is pressed (function activated).

•BEEP 2ND: Beep is heard only when a secondary function is activated (press and hold).

•BEEP OFF: Beep is not heard.

Liquid Crystal Display (LCD)

The liquid crystal display (LCD) panel (8) displays the frequency, time and activated functions of the unit.

NOTE: After being subjected to cold temperatures, LCD panels may take longer to respond and visibility of the numbers on the LCD may decrease slightly. The LCD display will return to normal when the temperature increases to a normal range.

Display (DISP)

When the unit is on, the LCD automatically shows the display for the current source of operation.

When the unit is on, press the DISP button (9) to display the time of day. After five seconds, the display reverts to the current source.

Auxiliary Input

Lift the cover on the right side of the radio to reveal the AUX IN connector (16). Use the included 3.5mm media cable to connect a portable media device for playback through the vehicle sound system.

Front Panel Release

The front panel REL (release) button (10) releases the mechanism that holds the front panel to the chassis.

Detaching the Front Panel

To detach the front panel, first press the REL button (10) to release the left side of the panel. Next, grasp the released side and pull the panel off the chassis. After removing the front panel, store it in the supplied carrying case to protect it from dirt and damage.

REMOVE FRONT PANEL

1

2

Re-attaching the Front Panel

To re-attach the front panel, make sure the electrical terminals on the back of the panel are free of dust and dirt, as debris could cause intermittent operation or other malfunctions. Position the right side of the panel in place so that it is correctly engaged, and then lightly press the left side of the panel until the panel locks into place.

Reset Button

The reset button (26) is located on the front of the chassis and can only be accessed with the front panel removed. The reset circuitry protects the microprocessor circuitry. Since resetting the unit will erase the time and preset memories, it should only be activated upon initial installation after all wiring is complete, or if there is a malfunction of any of the switches on the unit. In these circumstances, pressing the reset button will clear the system and return the unit to normal operation.

RESET

26

4

Page 5 Page 7
Image 6
Page 5 Page 7
Contents CD1213 CD1213 Contents Toll-Free Installation Assistance Introduction Operating Instructions PowerVolume SourceAudio Mute Mute SelectLoudness Band Equalizer Selector PEQDisplay Disp Reset ButtonLiquid Crystal Display LCD Auxiliary InputTuneroperation TuningScan Tuning Scan AM/FM Band Selector BandMono/Stereo Selector Mono Preset StationsPreset Scan / Automatically Store PS/AS Local / Distance SelectorTrack Select CD Player OperationInsert CD Play/PauseDisc Shuffle RDM CD Player Error CodesDisc Repeat RPT Disc EjectRemote Control Compact Discs Care and MaintenanceCD Player CD Care and HandlingTroubleshooting Problem Cause Corrective ActionSpecifications Introducción ContenidoLínea Gratuita de Asistencia de Instalación Encendido VolumenInstrucciones DE Funcionamiento FuenteSilenciar Audio Mute SeleccionarIntensidad Band Selector de Ecualizador PEQPantalla Disp Tono BeepPantalla de Cristal Líquido LCD Entrada AuxiliarReset Sintonizador Operación DE SintonizadorSelector de Banda AM/FM Band Exploración de Sintonía ScanSelector Mono/Stereo Mono Estaciones PrefijadasExplorar Predeterminadas / Almacenar Automáticamente PS/AS Selector Local / DistanteSelección de Pista Operación DEL Reproductor DE CDInsertar CD Reproduce/PausaRepetir Disco RPT Códigos de error del Reproductor de CDBúsqueda de Ingreso a Disco INT Aleatorio RDMControl Remoto Discos Compactos Cuidado Y MantenimientoReproductor de CD Cuidado y Manipulación de CDResolución DE Problemas Problema Causa Acción CorrectivaEspecificaciones CD1213 Aide d’installation gratuit CommencerTable des matières Puissance Assourdir l’Audio Mute SélectionnerIntensité Band Sélecteur d’Egaliseur PEQAffichage Disp Tonalité BipAffichage aux cristaux liquides LCD Entrée auxiliaireReset Syntonisation Operation TunerSélecteur de bande AM/FM Band Syntonisation par scannage ScanSélecteur Mono/Stereo Mono Stations prérégléesScanner les préréglés/Mise en mémoire automatique PS/AS Sélecteur Local / DistanceSélection de piste Operation Lecteur CDInsérer le CD Reproduction/suspensionMélange du disque RDM Scannage de l’intro du disque INTRépétition du disque RPT Ejection du disqueTelecommande Soin ET Maintenance Lecteur CDSoin et manipulation du CD Depannage Problème Cause CorrectionLecteur CD Entrée auxiliaireGénéral CD1213 Obtaining Warranty Service What is covered?What is not covered? Who is covered?¿Qué no está cubierto? ¿Quién está cubierto?¿Qué está cubierto? LimitacionesCe qui est couvert ? Obtenir le service de garantieQui est couvert ? Ce qui nest pas couvert ?Series
Top Page Image Contents