Jensen CD1213 owner manual Disc Repeat RPT, Disc Shuffle RDM, Disc Eject, CD Player Error Codes

CD1213

Disc Repeat (RPT)

Press the 3 RPT button (21) during disc play to continuously repeat the selected track. “S-- RPT” will appear in the display. Press 3 RPT again to stop repeating. “S--RPT” will disappear from the display, and regular play will resume. The repeat function will also be canceled when activating the scan or shuffle functions.

Disc Shuffle (RDM)

Press the 4 RDM button (22) during disc play to play all tracks on a CD in random, shuffled order. “S--SHF” will appear in the display. Press 4 RDM again to stop random play. “S-SHF” will disappear from the display and regular play will resume. The shuffle function will also be canceled when activating the scan or repeat functions.

Disc Eject

Press the eject button (12) to stop CD play and eject the disc. The unit will change to tuner or AUX operation, depending on which mode was in operation prior to disc play. If the disc is not removed from the unit within 15 seconds, the disc will be reloaded to prevent accidental damage. Disc play can be resumed by pressing SRC (2) to choose the CD player function.

CD Player Error Codes

If a problem should develop while operating the CD player, “Disc Error” or “Error 1” may appear

on the display panel. If “Disc Error” appears, try ejecting and reloading the disc into the player. While the disc is out of the unit, make sure it is clean and undamaged, and then load it correctly. “Error 1” can indicate a number of problems with the unit, including a mechanical error or an error in the microprocessor control of the player. Pressing the reset button (26) may help, but will erase the time and preset memory. If the suggested measures do not solve the problem, contact an approved warranty station near you for further assistance.

8