CD1213
TUNEROPERATION
10 | 19 | 1 | 22 | 18 | 9 | 5 |
|
| 14 |
| 11 | 12 |
|
|
|
|
|
|
|
|
|
|
| CD1213 |
|
|
|
|
|
|
|
|
|
|
|
|
| AUX IN |
|
|
|
|
|
|
|
|
|
|
| 4 x 40W |
|
7 | 20 | 23 | 24 | 15 | 17 | 6 | 4 | 3 | 13 | 8 | 16 | LIFT |
|
| 21 |
| 25 |
| 2 |
|
|
|
|
|
|
US/EU (EUROPEAN) FREQUENCY SWITCH
On the right side of the chassis, under the mounting sleeve, is a switch labeled US/EU that allows the customer to switch between US and EU (European) frequency spacing.
Press the RESET button after moving the US/EU switch.
AM/FM Band Selector (BAND)
Press the BAND button (5) during radio play to switch between three FM bands and one AM band. “F1”, “F2”, “F3” or “AM” will appear in the display to indicate the band currently selected.
Tuning
Automatic Tuning
Press the >> button (14) to tune upward in frequency and the << button (13) to tune downward in frequency. The unit will automatically stop at the next strong station. If
the Local mode is active, the radio will seek the next strong local station when either button is pressed.
Manual Tuning
Press the >> (14) or << (13) button for more than two seconds to select manual tuning mode. “MANUAL” will appear in the display. Press the Up or Down Tuning buttons to move radio frequency up or down two digits at a time. Press and hold the Up or Down Tuning buttons to quickly advance to a certain frequency. Release when the desired frequency is
reached. If tuning is not adjusted within five seconds of entering manual tuning mode, the radio will revert to automatic tuning and “AUTO” will appear in the display.
Scan Tuning (SCAN)
Press the SCAN button (15) to scan upwards through all the strong channels in the current band. The unit will pause and play each station for five seconds, and the station frequency will flash in the display during this time. Press SCAN again to stop scanning and listen to the current station.
5