Clarion DB625MP owner manual Adjustment Menu

Adjustment Menu

Adjustment Menu

Setting during operation beep sound etc. func- tions.

The Adjustment menu basic operation method is explained here. The reference for the Adjustment menu items and their setting content is after this operation explanation.

1.Enter Adjustment menu mode

Press the [] button for at least 1 second. “MENU” is displayed.

2.Select the Adjustment menu item Press the [FM] or [AM] button.

Example: When you want to set the beep sound select the “Beep” display.

3.Set the Adjustment menu item Press the [a] or [d] button.

Example: When “Beep” is selected, each time the button is pressed it switches “Beep ON” or “Beep OFF”. Select 1 of them as the setting.

You can continue by returning to step 2 and setting other items.

4.Exit Adjustment menu mode

Press the [] button.

Note:

•When other items that are applicable to the basic operation method above are displayed afterwards their setting content chart is entered. (Normally the uppermost setting in the chart is the original set- ting.)

Also, the explanation for items that aren’t appli- cable (<Manual Clock Adjustment>etc.) are en- tered step by step.

Touch Sensor Tone

Setting the operation check sound (beep sound) ON/OFF.

Display	Setting
“Beep ON”	Beep is heard.
“Beep OFF”	Beep canceled.

Manual Clock Adjustment

1.Select Clock Adjustment mode Press the [FM] or [AM] button. Select the “CLK ADJ” display.

2.Enter Clock Adjust mode

Press the [a] or [d] button for at least 1 second.

The clock display blinks.

3.Adjust the hours

Press the [FM] or [AM] button.

Adjust the minutes

Press the [a] or [d] button.

4.Exit Clock adjustment mode

Press the [ ] button.

Note:

•At the time of clock adjustment, when only a change of the hour is made, it is not adjusted to 00 seconds. Only when the minute is changed, it is adjusted to 00 seconds.

DSI (Disabled System Indicator)

A red indicator will blink on the unit after the face- plate is removed, warning potential thieves.

Display	Setting
“DSI ON”	LED flashes.
“DSI OFF”	LED OFF.

Selectable Illumination

Selecting the button illumination color as green or red.

Display Setting

“KEY GRN” The illumination color is green.

“KEY RED” The illumination color is red.

Switching Display Type

Setting the Display type.

Display	Setting
“DisplayD”	Demonstration.
“DisplayA”	Circle Display is play time.
“DisplayB”	Circle Display is clock.
“DisplayC”	Silent display type.

DB625MP 19