Clarion MAX685BT Setting/Ejecting a Disc, Handling, Cleaning, On Discs, No/Non Storage

Setting/Ejecting a Disc

English Owner’s manual

Notes on handling discs

Handling

•New discs may have some roughness around the edges. If such discs are used, the player may not work or the sound may skip. Use a ball-point pen or the like to remove any roughness from the edge of the disc.

Ball-point pen

Roughness

•Never stick labels on the surface of the disc or mark the surface with a pencil or pen.

•Never play a disc with any cellophane tape or other glue on it or with peeling off marks. If you try to play such a disc, you may not be able to get it back out of the DVD player or it may damage the DVD player.

•Do not use discs that have large scratches, are misshapen, cracked, etc. Use of such discs may cause misoperation or damage.

•To remove a disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges.

•Do not use commercially available disc protection sheets or discs equipped with stabilizers, etc. These may damage the disc or cause breakdown of the internal mechanism.

Cleaning

•To remove fingermarks and dust, use a soft cloth and wipe in a straight line from the center of the disc to the circumference.

•Do not use any solvents, such as commercially available cleaners, anti-static spray, or thinner to clean discs.

•After using special disc cleaner, let the disc dry off well before playing it.

On Discs

•Exercise a good precaution when loading a disc. The operation panel will close automatically when leaving it open for a while.

•Never turn off the power and remove the unit from the car with a disc loaded.

CAUTION

CAUTION

For your safety, the driver should not insert or eject a disc opening the operation panel while driving.

No/Non

Storage

•Do not expose discs to direct sunlight or any heat source.

•Do not expose discs to excess humidity or dust.

•Do not expose discs to direct heat from heaters.

20 MAX685BT