Clarion MAX685BT owner manual Adjusting the Tone, Adjusting the Balance/Fader

Audio Settings

English

Note:

•These operations are disabled when the DZE (Digital Z-Enhancer) function is set to other than “OFF”.

Adjusting the BASS

The bass gain, bass frequency (center frequency) and bass Q can be adjusted as follows.

3-1. Touch the [TONE] key to display the TONE tab screen.

3-2. Touch the [BASS] key.

3-3. Touch the [[] or []] key for the desirable type to adjust to a desirable level.

GAIN: –6 to 8

•The factory default setting is “0”. FREQ: 50Hz, 80Hz, 120Hz

•The factory default setting is “50Hz”. Q: 1, 1.25, 1.5, 2

•The factory default setting is “1”.

Adjusting the MID

The middle gain, middle frequency (center frequency) and middle Q can be adjusted as follows.

3-1. Touch the [TONE] key to display the TONE tab screen.

3-2. Touch the [MID] key.

3-3. Touch the [[] or []] key for the desirable type to adjust to a desirable level.

GAIN: –6 to 6

•The factory default setting is “0”. FREQ: 700Hz, 1kHz, 2kHz

•The factory default setting is “1kHz”. Q: 1.5, 2

•The factory default setting is “2”.

3-1. Touch the [TONE] key to display the TONE tab screen.

3-2. Touch the [TREBLE] key.

3-3. Touch the [[] or []] key for the desirable type to adjust to a desirable level.

GAIN: –6 to 6

•The factory default setting is “0”. FREQ: 8kHz, 12kHz

•The factory default setting is “12kHz”.

Adjusting the Balance/Fader

3-1. Touch the [BAL/FAD] key to display the BAL/FAD tab screen.

3-2. Touch the [{] or [}] key to adjust to the fader level.

[{]:

Emphasizes the sound from the front speakers.

[}]:

Emphasizes the sound from the rear speakers.

Adjustment range: front 12 to rear 12

• The factory default setting is “0”.

3-3. Touch the [[] or []] key to adjust to the balance level.

[[]:

Emphasizes the sound from the left speakers.

[]]:

Emphasizes the sound from the right speakers.

Adjustment range: left 12 to right 12

• The factory default setting is “0”.

Adjusting the Non-Fader output volume

You can adjust the volume output from the unit's non-fader output terminal.

3-1. Touch the [OTHERS] key to display the OTHERS tab screen.

3-2. Touch the [–] or [+] key of the NON FADER VOL item to adjust to desirable level. Setting range: –6 to 6

• The factory default setting is “0”.

Owner’s manual