DVD Video Operations
English Owner’s manual
Selecting the DVD Video mode
1.Set a DVD video disc to the DVD player. The system will automatically read the disc data, change to the DVD mode (DVD Video mode), and start playback after a while.
See also “Setting/Ejecting a Disc” (page 20).
Changing the DVD System Settings
Note:
•If the Setup operation is performed in the middle of DVD video play, the disc will restart from beginning.
Displaying the DVD Setup screen
1.Touch the screen to display the DVD Video mode screen.
2.Touch the [Options] key to display the Options menu.
3.Touch the [Set up] key to display the DVD Setup screen.
WARNING
•Some videos may be recorded at a higher volume level than desired. Increase the volume gradually from the minimal setting after the video has started.
•For your safety, the driver should not watch the video or operate the controls while driving. Please note that watching and operating the video while driving are prohibited by law in some countries.
Note:
•For your safety, this system has a safety function which turns off the picture when the car is moving, so only the audio can be heard. The picture can only be watched when the car is stopped and the parking brake is applied.
•If “AUDIO ONLY” appears on the screen just after turning on the ACC power of the car, release the parking brake while confirming safety, and then engage the parking brake again.
●When a DVD video disc is already set
1.Press the [SRC] button to display the Source screen.
2.Touch the [DVD] key to select the DVD Video mode.
The system changes to the DVD mode (DVD Video mode), and starts playback from the previous position.
•Touch the [C] key to display the next page.
•Touch the [c] key to return to the previous page.
4.Perform setting for the desired setting items. See the following sections for detail.
•In the following sections, only the details of settings are described, the procedures to select items are skipped.
5.Touch the [Back] key.
28 MAX685BT