5. CAUTIONS ON INSTALLATION
1.Prepare all articles necessary for installing the main unit before starting.
2.This model features an operation panel that slides forward.
On some types of cars, the operation panel may make contact with the dashboard or gearshift lever, in which cause it cannot be installed. Before installing, check that the unit will not hamper operation of the gearshift lever or obstruct your view before selecting the installation location. (Figure 2)
Dashboard
Gearshift lever (check that it does not touch the LCD.)
Figure 2
3.Install the unit within 30θ of the horizontal plane. (Figure 3)
5.Use the included screws for installation. Using other screws can cause damage. (Figure 4)
ChassisChassis
Damage
Max. 8 mm (M5 screw)
Figure 4
6.This unit has a fan motor in the back of the main unit so as not to raise the temperature in the main unit. When the fan motor vent is covered with cords or mounting bracket, it may cause a malfunction. Be sure not to cover it when wiring cords. (Figure 5)
Fan motor vent
Figure 5
English INSTALLATION MANUAL
Max. 30°
Figure 3
4.If you have to do any modification on the car body, such as drilling holes, consult your car dealer beforehand.