XM Satellite Radio Operations
Receiving stations selected by category
Satellite Radio allows you to select broadcast channel category (contents).
1.Touch the [CAT] key to display the Category List screen.
2.Touch the desired Category item key to select the category.
•Touch the [c] or [C] key to scroll the category list.
3.Touch the [R] or [F] key to select a station.
The system displays the information on the previous or next available channel that meets the specified category.
4.Touch the [ 
] (Enter) key within 5 seconds.
The system will tune to the channel that the information is displayed.
Note:
•When the Category List screen is displayed, the category of the last received channel is displayed first.
•If you do not touch the [ 
] (Enter) key within 5 seconds, the system will return to the previous display.
•When the Direct function is set to “ON” from the
Options screen, touching the [ 
] (Enter) key is not required. The system will automatically receive the specified channel when 2 seconds passes.
•When no operation is made within 15 seconds, the system will return to the Channel selection mode.
Changing the Direct setting
When this function is set to “ON”, touching the
[
] (Enter) key is not required to tune in the station selected.
• The factory default setting is “OFF”.
1.Touch the [Options] key to display the Options screen.
2.Touch the [ON] or [OFF] key of the Direct item to set this function to “ON” or “OFF”.
3.Touch the [Back] key.
Setting XM Source function
When this function is set to “OFF”, the [XM] key is not displayed on the Source screen when no XM tuner is connected.
• The factory default setting is “ON”.
1.Touch the [Options] key to display the Options screen.
2.Touch the [ON] or [OFF] key of the XM Source item to set this function to “ON” or “OFF”.
3.Touch the [Back] key.
English Owner’s manual
Category Scan function
In a category scan, broadcast channels in the same category as the current channel are selected about every 10 seconds. During scanning channels are displayed in abbreviated form, the display mode cannot be switched.
1.Touch the [CAT] key to display the Category List screen.
2.Touch the desired Category item key to select the category.
•Touch the [c] or [C] key to scroll the category list.
3.Touch the [CAT SCAN] key.
The system will start the category scan.
4.Touch the [CAT SCAN] key again to tune to the channel currently selected.
The category scan will be terminated.
Note:
•Category scanning is not available when no category is defined for the current channel.