2Zone Function
About the 2Zone function
The 2Zone function is a function that assigns separate source output to the Main zone (this unit) and Sub zone (the optional rear monitor) by simultaneously playing two sources in this system. Therefore, the rear passengers are allowed to enjoy a different video source from the source played on the monitor screen of this unit.
•The source sounds of the Main zone are output from the speakers of the vehicle side, and those of the Sub zone are from the optional headphone systems.
•Controlling a source assigned to the Sub zone can be made by using the optional remote control unit. To control it from this unit, once assign the same source to the Main zone, then control it.
•When a media without video images is played on the Sub zone, a black screen is output to the rear monitor.
Note:
•When an interrupt of the Bluetooth telephone or the navigation system arises during the 2Zone function is turned on, the sound of the Main zone is muted, but the sound of the Sub zone is output normally.
When it arises during the 2Zone function is turned off, the audio signals to the 4ch speakers are attenuated, and the voice from the navigation system is output from the front two speakers.
•You cannot operate the 2Zone function during the interrupt of the Bluetooth telephone or the navigation system.
•When the same source is assigned for Main and Sub zones, operations in a zone are also applied for another zone.
English Owner’s manual
Assignable source mode for Main/ Sub zones
●For Main zone
All the source modes can be assigned for the Front zone.
●For Sub zone
The following source modes can be assigned:
•DVD mode
•USB mode
•AUX mode
Setting the 2Zone function
• The factory default setting is OFF.
1.Press the [SRC] button to display the Source screen.
2.Touch the [2 Zone] tab to display the 2 Zone tab screen.
The source keys for the Sub zone are displayed.
3.Touch the desired source key you wish to assign to the Sub zone.
The 2Zone function is turned on with the selected source mode assigned to the Sub zone.
4.Touch the [Back] key to return to the previous screen.
Note:
•Use the remote control unit to control the source assigned to the Sub zone. To control it from this unit, once select the same source mode as assigned to the Sub zone for the Main zone, and then control it.
Turning off the 2Zone function
1.Press the [SRC] button to display the Source screen.
2.Touch and hold the [2Zone Off] key for more than 1 second.