Bluetooth Telephone Operations

•Select either LOW or HIGH depending on the type of your vehicle and cellular phone.

•The factory default setting is “LOW”.

2-1. Touch the [LOW] or [HIGH] key of the Noise Canceller item to set the function.

[LOW]:

Suitable for a GSM cellular phone.

[HIGH]:

Suitable for a CDMA cellular phone.

●Setting Ring Tone Select

The system can ring if the cellular phone cannot generate ring tones when the Bluetooth connection has been established.

• The factory default setting is “AUTO”.

2-1. Touch the [AUTO] or [Internal] key of the Ring Tone Select item to set the function.

[AUTO]:

The system will ring only when the cellular phone cannot generate ring tones.

[Internal]:

The system will ring regardless of the cellular phone. Select this when no ring tone is generated with the “AUTO” selected.

●Setting Ring Tone Volume

You can adjust the volume of the ring tone in 10 levels.

• The factory default setting is “5”.

2-1. Touch the [[] or []] key of the Ring Tone Volume item to adjust the volume level.

●Setting Registration Type

You can change the distribution of maximum number of Phone Book data can be registered to each telephone.

• The factory default setting is “3”.

2-1. Touch the [C] key to display the next screen.

2-2. Touch the [1], [2], or [3] key of the Registration Type item to set the function.

[1]:

Allows 250 records for first two cellular phones, and no record for the others.

[2]:

Allows 200 records for first cellular phone, 100 records for second and third cellular phones, and 50 records for the others.

[3]:

Allows 100 records for each cellular phone.

●Selecting Microphone

You can select the microphone to be used.

• The factory default setting is “Internal”.

2-1. Touch the [C] key to display the next screen.

2-2. Touch the [External] or [Internal] key of the Microphone Select item to set the function.

Note:

•When the “Internal” is selected, and a call comes in during the operation panel open, the operation panel is automatically closed because the microphone is on the operation panel.

•When the “Internal” is selected, the [7] (OPEN/ CLOSE) button is disabled during a call.

●Setting Microphone Gain

You can adjust the input level of the microphone in 5 levels.

• The factory default setting is “3”.

Note:

•The input level of the microphone can be affected by its surroundings. Adjust the level when the person on the other end of the telephone has a reception problem.

2-1. Touch the [C] key to display the next screen.

2-2. Touch the [[] or []] key of the Microphone Gain item to adjust the input level.

●Confirming Bluetooth Information and setting Pass Key

You can confirm the various information concerning the Bluetooth Interface features.

2-1. Touch the [C] key to display the next screen.

2-2. Touch the [Info] key of the BT Info item to display the information on the screen.

2-3. When you finish confirming the Bluetooth information, touch the [Back] key to return to the previous screen.

If you want to change the Pass Key setting of this unit, perform the following steps.

2-4. Touch the text box of the Pass Key item to display the Ten-Key Pad screen.

• The factory default setting is “1234”.

2-5. Enter your desired 4-digit PIN number, then touch the [ENT] key.

Registering your cellular phone (Pairing)

You can register up to 5 cellular phones.

1.Turn on the power of the cellular phone you wish to register.

2.Touch the [Cellular] key to display the Cellular Select screen.

English Owner’s manual

Clarion MAX685BT Bluetooth Telephone Operations, Registering your cellular phone Pairing