Basic Operations
English
Owner’s manual
Turning the liquid crystal panel horizontal (Air conditioner operation mode)
When the way the liquid crystal panel is mounted hinders the operation of the air condi- tioner, the position of the panel can be turned horizontal temporarily.
1.Press and hold the [OPEN] button when the liquid crystal panel is upright, and release the button when a beep is heard.
2.The liquid crystal panel turns horizontal.
When the panel is closed:
Each time you press the
Note:
•When the panel is closed, operations can only be made through the remote control unit.
When the panel is open:
∗Press the [OPEN] button again when the liquid crystal panel is in the horizontal position, and the panel returns to the original position.
∗Even if the button is not operated for about 10 seconds, the panel returns to the original position with a warning sound.
Turning on and off the monitor
Pressing and holding the [DISP] button for 1 second or longer turns the monitor off. To return to the monitor on, press the [DISP] button once again.
∗When a button is pressed or during security moni- toring, the
1.Press the [A-M] button to change into the AUDIO-MODE display.
2.Touch the
3.When the
•“TYPE 1”
•“TYPE 2”
•“TYPE 3”
•“OFF”
4.When the setting is finished, touch the [RTN] key to return to the
Mute | Touch the [RTN] key on the | |
screen to return to the STANDARD display. | ||
Each time you press the [s] button, mute is | ||
∗ To return from the | ||
turned on and off. | ||
selection display to the STANDARD display, | ||
“MUTE” appears when mute is turned on. | ||
press the |
Setting the Z-enhancer
This unit comes with 3 types of sound tone effect stored in memory. Select the one you prefer.
∗The factory default setting is
When a
•
Setting emphasizing bass.
•
Setting emphasizing treble.
•
Setting emphasizing bass and treble.
•
Neither bass nor treble are em- phasized by the
Note:
•Incapable of operation when connecting DSP (DPH910) and DVD player (DVS9755z).
Adjusting the Z-enhancer
Notes:
•The Z-enhancer cannot be adjusted when it is turned off.
•This function is enabled only when the panel is open. 1. Press the
AUDIO-MODE display.
2.Touch the
3.Touch the [w] or [z] key to adjust to the de- sirable level.
∗When type 1 is selected, you can adjust the bass in the range of ±2.
∗When type 2 is selected, you can adjust the treble in the range of ±2.
∗When type 3 is selected, you can adjust the bass and treble in the range of ±2.
4.When adjustment is finished, touch the [RTN] key on the
18 VRX835